Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2008, Vol. 9 Issue (5): 640-647    DOI: 10.1631/jzus.A071476
Civil & Mechanical Engineering     
Investigation on short-term burst pressure of plastic pipes reinforced by cross helically wound steel wires
Jin-yang ZHENG, Yong-jian GAO, Xiang LI, Xiu-feng LIN, Yu-bin LU, Yan-cong ZHU
Institute of Chemical Machinery and Process Equipment, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Plastic pipes reinforced by cross helically wound steel wires (PSP), which have exhibited excellent mechanical performance, consist of inner polyethylene (PE) layer, winding layer and outer PE layer. The winding layer is composed of two monolayers where steel wires are cross helically wound. An analytical procedure is developed to predict the short-term burst pressure of PSP as the monolayer is assumed to be elastic and orthotropic. The 3D anisotropic elasticity and Maximum Stress Failure Criterion are employed in the formulation of the elasticity problem. Good agreement between the theoretical results and the experimental data shows that the proposed approach can well predict the short-term burst pressure of PSP.

Key wordsComposite pipes      Maximum Stress Criterion      Short-term burst pressure     
Received: 06 September 2007      Published: 15 April 2008
CLC:  TQ320  
Cite this article:

Jin-yang ZHENG, Yong-jian GAO, Xiang LI, Xiu-feng LIN, Yu-bin LU, Yan-cong ZHU. Investigation on short-term burst pressure of plastic pipes reinforced by cross helically wound steel wires. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(5): 640-647.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A071476     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2008/V9/I5/640

[1] LI Ji-quan, LI De-qun, GUO Zhi-ying, LV Hai-yuan. Single gate optimization for plastic injection mold[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(7): 1077-1083.