大型注塑件的翘曲变形控制及可拓优化设计
Warpage deformation control and extension-based optimization design for large injection-molded parts
大型注塑件的翘曲变形控制及可拓优化设计 |
| 张占辉,王伟,李兴森,赵金军 |
|
Warpage deformation control and extension-based optimization design for large injection-molded parts |
| Zhanhui ZHANG,Wei WANG,Xingsen LI,Jinjun ZHAO |
| 图12 注塑建筑模板实物图 |
| Fig.12 Physical picture of injection-molded building formwork |
|
|