基于螺旋接触线的五轴侧铣刀具定位方法
Five-axis flank milling tool positioning method based on spiral contact line
基于螺旋接触线的五轴侧铣刀具定位方法 |
| 李忠朋,张立强,刘钢 |
|
Five-axis flank milling tool positioning method based on spiral contact line |
| Zhongpeng LI,Liqiang ZHANG,Gang LIU |
| 图15 本文方法下加工误差的仿真值与实测值对比（ v=0.45） |
| Fig.15 Comparison between simulated and measured machining error values under the method in this paper （v=0.45） |
|
|