基于响应面法的绞磨机辅助拉尾绳装置优化设计
蔡锦云1,2(
),刘忠1,2,3(),王罡4,赵庆斌5,安宁5,杜旭伟6,李东良6,李源周1
),刘忠1,2,3(),王罡4,赵庆斌5,安宁5,杜旭伟6,李东良6,李源周1
Optimization design of auxiliary tail rope pulling device for winch mill based on response surface methodology
Jinyun CAI1,2(),Zhong LIU1,2,3(),Gang WANG4,Qingbin ZHAO5,Ning AN5,Xuwei DU6,Dongliang LI6,Yuanzhou LI1
),Zhong LIU1,2,3(),Gang WANG4,Qingbin ZHAO5,Ning AN5,Xuwei DU6,Dongliang LI6,Yuanzhou LI1
图8. 辅助拉尾绳装置等效应力云图
Fig.8. Equivalent stress cloud map of auxiliary tail rope pulling device
