Please wait a minute...
工程设计学报
工程设计学报  2017, Vol. 24 Issue (3): 343-349,358    DOI: 10.3785/j.issn.1006-754X.2017.03.015
整机和系统设计     
经编机电子贾卡混合异构串行通信系统设计
赖森财1, 任雯1,2
1. 三明学院 机电工程学院, 福建 三明 365004;
2. 华南理工大学 自主系统与网络控制教育部重点实验室, 广东 广州 510641
The design of electronic jacquard hybrid isomerism serial communication system for warp knitting machine
LAI Sen-cai1, REN Wen1,2
1. College of Mechanical and Electrical Engineering, Sanming University, Sanming 365004, China;
2. Ministerial Key laboratory of Autonomous Systems and Network Control, South China University of Technology, Guangdong 510640, China
 全文: PDF(2617 KB)   HTML
摘要：

针对传统经编机多板卡架构的电子贾卡控制系统存在的可靠性低、维护困难等问题，设计了一种面向工程应用、高度集成的新型嵌入式电子贾卡导纱针块（embedded electronic jacquard guide bar，EEJGB）。基于EEJGB，提出了一种兼顾通信可靠性和容错性的分布式混合异构串行通信架构，并对该通信架构进行了实时性分析。同时，为获取EEJGB的地址，提出了一种动态分配机制。为了验证该通信方法的有效性和可行性，以Modbus协议下的具体通信方法实例进行试验分析。分析结果表明：所提出的混合异构串行通信架构实时性高，在保证花型文件可靠传输的同时，极大地便利了EEJGB的故障定位、快速检修和分布式扩展，研究结果能够为新一代集成电子贾卡控制系统的设计提供有效的参考。
关键词： 经编机电子贾卡;  串行通信;  Modbus    
Abstract:

Aimed at the problems of low reliability and maintenance difficulties in the traditional warp knitting machine electronic jacquard control system with complex multi-card structure, a novel embedded electronic jacquard guide bar (EEJGB) characterized by highly integrated is designed. Based on EEJGB, a hybrid isomerism serial communication system was designed. Such system ensured real-time communication as well as reliability and fault tolerance of communication system, which was investigated using real-time analysis. Meanwhile, a new dynamic configuration method of EEJGB addresses was proposed.To prove the effectiveness and feasibility of the proposed communication scheme, a case of Modbus based on communication scheme was provided in detail. The analysis shows that the proposed hybrid isomerism communication architecture with high real-time performance can ensure the reliable delivery of pattern files and fault location, rapid maintenance and distributed expansion of EEJGB, which can offer some useful reference for the design of the new generation of integrated electronic jacquard control system.
Key words: warp knitting machine electronic jacquard    serial communication    Modbus
收稿日期: 2017-02-13 出版日期: 2017-06-28
CLC:  TP273  
基金资助:

国家自然科学基金资助项目（51576114）；福建省自然科学基金资助项目（2015J01667）；三明市科技项目（2015-G-5）
通讯作者: 任雯(1979-),男,河南周口人,副教授,博士,从事分布式网络化控制系统、鲁棒控制、无线传感器网络等研究,E-mail:auwren@foxmail.com,http://orcid.org//0000-0002-3605-7274     E-mail: auwren@foxmail.com
作者简介: 赖森财(1963-),男,福建泉州人,副教授,从事控制系统和电路设计等研究,E-mail:24318744@qq.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
赖森财
任雯

引用本文:

赖森财, 任雯. 经编机电子贾卡混合异构串行通信系统设计[J]. 工程设计学报, 2017, 24(3): 343-349,358.

LAI Sen-cai, REN Wen. The design of electronic jacquard hybrid isomerism serial communication system for warp knitting machine[J]. Chinese Journal of Engineering Design, 2017, 24(3): 343-349,358.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2017.03.015    或    https://www.zjujournals.com/gcsjxb/CN/Y2017/V24/I3/343

[1] 蒋高明. 经编装备技术研究现状和发展趋势[J].纺织学报, 2012, 33(12): 140-144. JIANG Gao-ming. Present research situation and developing tendency of warp knitting equipment and technology[J]. Journal of Textile Research, 2012, 33(12): 140-144.
[2] 任雯, 胥布工. 基于FI-SNAPID算法的经编机多速电子送经系统开发[J]. 浙江大学学报(工学版), 2013, 47(10): 1712-1721. REN Wen, XU Bu-gong. Development of multi-speed electronic let-off system for warp knitting machine based on FI-SNAPID algorithm [J]. Journal of Zhejiang University (Engineering Science), 2013, 47(10): 1712-1721.
[3] 张琦, 蒋高明, 夏风林. 经编机数控系统关键技术及其发展[J]. 纺织导报, 2013(4): 77-80. ZHANG Qi, JIANG Gao-ming, XIA Feng-lin. Development of key technologies for warp-knitting machine CNC system.[J]. China Textile Leader, 2013(4): 77-80.
[4] PETER O. Warp knitting machines[J]. International Textile Bulletin, 2013, 49(6): 52-53.
[5] KUMARAVELU R, POORNIMA S, KASTHURI N. Woven design data transmission using TTL logic for 128 hooks electronic cardless jacquard[J]. Indian Journal of Fibre & Textile Research, 2015, 40(1): 100-104.
[6] XIA Feng-lin, GE Ming-qiao. Motion rule of electronically pattern system on a high speed warp knitting machine[J]. Fibres & Textiles in Eastern Europe, 2009, 17(4): 64-67.
[7] 刘振华, 李瑞峰, 徐莉萍. 压电贾卡选针片的结构与形变分析[J]. 压电与声光, 2012, 34(2): 229-232. LIU Zhen-hua, LI Rui-feng, XU Li-ping. Analysis of the deflection and structure of piezoelectric jacquard knitted selecting element[J]. Piezoelectrics & Acoustooptics, 2012, 34(2): 229-232.
[8] 陈世钗, 刘炉, 李瑞峰, 等. 多梳贾卡拉舍尔经编机全自动化改造实践[J]. 压电与声光, 2014, 36(4): 599-603. CHEN Shi-chai, LIU Lu, LI Rui-feng, et al. Full automation reformation of multibar jacquard Raschel warp knitting machine[J]. Piezoelectrics and Acoustooptics, 2014, 36(4): 599-603.
[9] 江建君, 蒋高明, 夏风林. 经编压电贾卡系统工作原理 探讨[J]. 针织工业, 2009(3): 23-25. JIANG Jian-jun, JIANG Gao-ming, XIA Feng-lin. The working principle discussion for piezoelectric jacquard system [J]. Knitting Industry, 2009(3): 23-25.
[10] 程龙, 蒋高明. RSJ4/2F型贾卡经编机提花原理及其工艺设计[J]. 针织工业, 2014(10): 15-18. CHENG Long, JIANG Gao-ming. The jacquard principle and technology design of the RSJ4/2F warp knitting machine[J]. Knitting Industry, 2014(10): 15-18.
[11] 李永虎, 夏风林, 蒋高明. 基于CAN总线的压电贾卡控制系统[J].纺织导报, 2010(7): 86-88. LI Yong-hu, XIA Feng-lin, JIANG Gao-ming. Piezo jacquard control system based on CAN field bus[J], China Textile Leader, 2010(7): 86-88.
[12] 孙嘉良. 压电贾卡梳控制驱动系统: CN201110033921.4 [P].2012-12-05. SUN Jia-liang. Piezoelectric jacquard bar control and drive system: CN201110033921.4 [P]. 2012-12-05.
[13] 李开霞, 叶晓东, 花加丽. 基于ATmega128单片机的压电式贾卡控制系统设计[J]. 现代电子技术, 2009(17): 211-214. LI Kai-xia, YE Xiao-dong, HUA Jia-li. Control system of piezoelectric jacquard based on ATmega128[J]. Modern Electronic Technology, 2009(17): 211-214.
[14] GAO M Y, LIU Y F. Design of the automatic jacquard control system based on STM32F407[C]//International Conference on Information Science, Electronics and Electrical Engineering, Hangzhou, Apr. 26-28, 2014.
[15] 胡旭东, 揭由君, 彭来湖. 双面提花圆机花型准备系统的设计[J]. 纺织学报, 2015, 36(6): 129-134. HU Xu-dong, JIE You-jun, PENG Lai-hu. Design of pattern prepare system of double-faced jacquard circular knitting machine[J]. Journal of Textile Research, 2015, 36(6): 129-134.
[16] 赖森财, 任雯, 刘永桂. 嵌入式电子贾卡控制系统设计[J]. 纺织学报, 2016, 37(10): 55-65. LAI Sen-cai, REN Wen, LIU Yong-gui. Design of embedded electronic jacquard control system[J]. Journal of textile research, 2016, 37(10): 55-65.
[17] 宏晶科技. STC15F2K60S2系列单片机器件手册[EB/OL].[2013-06-13].http://www.stcmcu.com/datashe et/stc/STC-AD-PDF/STC15.pdf. STC Micro. STC15F2K60S2 series MCU manuals [EB/OL]. [2013-06-13].http://www.stcmcu.com/datasheet/stc/ST C-AD-PDF/STC15.pdf.
[1] 陆颖瑜, 张永林. 利用Java实现对云台和镜头的远程控制[J]. 工程设计学报, 2007, 14(4): 324-328.
[2] 蒋念平，李建波，余晓明，赵庆孝. 空调测试系统的现场总线应用方案设计[J]. 工程设计学报, 2007, 14(2): 160-164.