Please wait a minute...
工程设计学报  2016, Vol. 23 Issue (4): 333-337,377    DOI: 10.3785/j.issn.1006-754X.2016.04.006
建模、分析、优化和决策     
全向车测量轮导引方式的设计与仿真
朱艳杰1, 宜亚丽1, 景常海1, 戴勇波2
1. 燕山大学 机械工程学院, 河北 秦皇岛 066004;
2. 北京星航机电装备有限公司, 北京 100074
Design and simulation of measuring wheel guidance mode for omnidirectional vehicle
ZHU Yan-jie1, YI Ya-li1, JING Chang-hai1, DAI Yong-bo2
1. College of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China;
2. Beijing Xinghang Mechanical-Electrical Equipment Co., Ltd., Beijing 100074, China
 全文: PDF(2311 KB)   HTML
摘要:

针对全向车位姿检测中由于麦克纳姆轮驱动打滑引起的整车运行精度测量误差大的问题,提出了测量轮自主导引方式,建立数学模型,并对AGV系统结构进行了阐述.设计方案中的整车六轮布局,采用四驱两从动,俩从动轮作为测量轮,运用差速原理获取自动导引全向车的路径信息,同时解决了现有单测量轮全向车原地回转状态下位姿无法精确检测的难题.提出浮动三自由度测量轮结构设计,实现实时接触地面,保证位姿检测的准确性,并对直线、曲线、原地自转三种典型运动状态下的位姿检测进行了ADAMS仿真,结果表明,此种导引方式可满足灵活设置路径下全向车位姿的精确检测,适用范围广.

关键词: 全向车测量轮导引麦克纳姆轮运动学仿真    
Abstract:

Aiming at solving the large measurement error of vehicle operating accuracy caused by the slip of driving Mecanum wheel in the detecting of the position and attitude of omnidirectional vehicle,measuring wheel guiding approach is proposed.Mathematical model is established,and the structure of AGV system is expounded.The layout structure of omnidirectional vehicle was made up of six wheels,including four driving wheels and two driven wheels in the design.The two driven wheels were used as measuring wheels,and the differential principle was applied to the two measuring wheels to get the path information of automatic guided omnidirectional vehicle,at the same time,the problem that the existing omnidirectional vehicle with single measuring wheel couldn't detect accurately in-situ rotary posture was solved.The structure of measuring wheel with floating three freedoms was put forward.It could maintain contact with ground in real time and ensure the accuracy of position detection.ADAMS simulation for the pose detection of three typical movements which were straight line,curve and in situ rotation is performed.The results show that this guidance mode can meet the accurate detection of position and attitude of omnidirectional vehicle on flexible path setting and has a wide application range.

Key words: omnidirectional vehicle    measuring wheel guidance    Mecanum wheel    kinematics simulation
收稿日期: 2015-11-27 出版日期: 2016-08-28
CLC:  TH11  
基金资助:

国家国防科技工业局科工一司资助项目(2012764).

通讯作者: 宜亚丽(1976—),女,山西永济人,副教授,博士,从事新型机械传动的理论与应用技术研究,E-mail:yiyali@ysu.edu.cn.http://orcid.org//0000-0001-8123-4172     E-mail: yiyali@ysu.edu.cn
作者简介: 朱艳杰(1987—),女,河北唐山人,硕士,从事自主导引车本体设计与运动性能分析等研究,E-mail:zhuyanjie1987@163.com.http://orcid.org//0000-0002-5465-9658
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
朱艳杰
宜亚丽
景常海
戴勇波

引用本文:

朱艳杰, 宜亚丽, 景常海, 戴勇波. 全向车测量轮导引方式的设计与仿真[J]. 工程设计学报, 2016, 23(4): 333-337,377.

ZHU Yan-jie, YI Ya-li, JING Chang-hai, DAI Yong-bo. Design and simulation of measuring wheel guidance mode for omnidirectional vehicle. Chinese Journal of Engineering Design, 2016, 23(4): 333-337,377.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2016.04.006        https://www.zjujournals.com/gcsjxb/CN/Y2016/V23/I4/333

[1] 叶锦华,李迪,叶峰.多信息融合定位的自动导向车鲁棒导引控制[J].电机与控制学报,2013,17(9):111-118. YE Jin-hua,LI Di,YE Feng.Robust guidance control of nonholonomic AGV with localization based on multi-source information fusion[J].Electric Machines and Control,2013,17(9):111-118.
[2] 蒲亮亮,张小栋.光导AGV智能循迹测控系统的建模与仿真[J].测控技术,2011,30(5):85-88,97. PU Liang-liang,ZHANG Xiao-dong.Modeling and simulation of intelligent tracking control system for a photoconductive AGV[J].Measurement and Control Technology,2011,30(5):85-88,97.
[3] 武星,楼佩煌,唐敦兵.自动导引车路径跟踪和伺服控制的混合运动控制[J].机械工程学报,2011,47(3):43-48. WU Xing,LOU Pei-huang,TANG Dun-bing.Integrated motion control of path tracking and servo control for an automated guided vehicle[J].Journal of Mechanical Engineering,2011,47(3):43-48.
[4] 武启平,金亚萍,任平,等.自动导引车(AGV)关键技术现状及其发展趋势[J].制造业自动化,2013,35(5):106-109. WU Qi-ping,JIN Ya-ping,REN Ping,et al.Present situation and developing trend of AGV key technology[J].Manufacturing Automation,2013,35(5):106-109.
[5] 王荣本,储江伟,冯炎,等.一种视觉导航的实用型AGV设计[J].机械工程学报,2002,38(11):135-138. WANG Rong-ben,CHU Jiang-wei,FENG Yan,et al.Design for a new type of AGV based on machine vision[J].Journal of Mechanical Engineering,2002,38(11):135-138.
[6] 张文,张作雷,曾连荪,等.基于超声波雷达传感器的AGV导航参数选择[J].传感器与微系统,2014,33(12):34-37. ZHANG Wen,ZHANG Zuo-lei,ZENG Lian-sun,et al.Selection of AGV navigation parameters based on ultrasonic wave radar sensor[J].Transducer and Microsystem Technologies,2014,33(12):34-37.
[7] 王皖君,张为松,杜亚玲,等.自动导引车导引技术研究现状与发展趋势[J].传感器与微系统,2009,28(12):5-7. WANG Wan-jun,ZHANG Wei-song,DU Ya-ling,et al.Research state and development trend of guide technology for automated guided vehicle[J].Transducer and Microsystem Technologies,2009,28(12):5-7.
[8] 摆玉龙,杨利君,董存辉.基于MC9S128的电磁导航智能车的设计与实现[J].测控技术,2011,30(11):59-64. BAI Yu-long,YANG Li-jun,DONG Cun-hui.Electromagnetic navigation smart car control system based on MC9S128[J].Measurement & Control Technology,2011,30(11):59-64.
[9] 季冉鸣,王芳.一种基于磁钉和惯导系统的机器人导航控制算法[J].制造业自动化,2014,36(2):52-54. JI Ran-ming,WANG Fang.A new method based on magnetic medium and inertial navigation system for the navigation control of AGV[J].Manufacturing Automation,2014,36(2):52-54.

[1] 王颜, 刘净瑜, 李光, 张加波, 刘星, 周欣欣. 基于IGPS和麦克纳姆轮的AGV导航控制系统设计[J]. 工程设计学报, 2020, 27(5): 662-670.
[2] 谢俊, 张晓庆, 王成军, 杨启志. 三平移并联茶叶筛分机机构设计及运动仿真[J]. 工程设计学报, 2012, 19(3): 208-212.