Please wait a minute...
工程设计学报
工程设计学报  2014, Vol. 21 Issue (4): 315-322    DOI: 10.3785/j.issn. 1006-754X.2014.04.002
智能设计     
基于事例推理的自由曲面型汽车前照灯方案设计方法
李 迪,郭鹏伟,吕庆龙
山东理工大学 交通与车辆工程学院，山东 淄博 255049
Conceptual design method for free form headlamp of  automobile by case-based reasoning
LI Di, GUO Peng-wei, Lü Qing-long
School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255049, China
 全文: PDF(2459 KB)   HTML
摘要： 快速地确定满足配光要求的自由曲面型前照灯的设计方案，是车身造型的要求.采用基于事例推理的方法，首先研究了面向对象的前照灯事例表达模型，然后根据最近邻事例检索方法，利用车灯包围盒和布置坐标系等预处理工具，建立了前照灯事例索引模型和匹配算法，提出了约束满足和尺寸驱动求解相结合的前照灯事例修改算法.应用实例表明，所提出的方法能在前照灯方案设计中引入工程设计要求，快速产生符合要求的设计方案，能够有效地克服工程要求与造型设计的冲突，减少设计过程的反复.
关键词： 自由曲面型汽车前照灯;  方案设计;  基于事例推理;  约束满足;  配光模拟    
Abstract: The styling design of auto-body requires a design scheme of its free form headlamp quickly that is satisfied with illumination and lighting requirements. According to the principle of case-based reasoning （CBR） methodology, this paper firstly studied the object-oriented case representation models for the free form headlamp. Then, a headlamp case index model and matching algorithms were established according to the nearest neighborhood method of case retrieval and applying some preprocessing tools, such as the headlamp bounding box and the layout reference frame. By representing the design knowledge and constraints of free form headlamp, this paper built an appropriate case matching algorithms to obtain a design scheme for free form headlamp and presented case adaptation strategies, combining dimension-driven with constrain satisfaction, to modify case solution fitting with the current problem definition. The application example showed the feasibility and practicability of the present methods on solving the conflict between engineering requirements and styling design. As a result, these methods may introduce design requirements into the conceptual design stage of free form headlamp and quickly achieve appropriate design scheme.
Key words: automobile free form headlamp    conceptual design    case-based reasoning    constraint satisfaction    optical simulation
收稿日期: 2013-11-05 出版日期: 2014-08-28
基金资助:

山东省自然科学基金资助项目(ZR2010EL002) ; 山东理工大学青年教师发展支持计划资助项目.
作者简介: 李迪(1970—)，男，山东沂水人，副教授，博士，从事车身数字化设计与制造研究，E-mail：halimuzi@163.com.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
吕庆龙
李 迪
郭鹏伟

引用本文:

李 迪,郭鹏伟,吕庆龙. 基于事例推理的自由曲面型汽车前照灯方案设计方法[J]. 工程设计学报, 2014, 21(4): 315-322.

LI Di, GUO Peng-wei, Lü Qing-long. Conceptual design method for free form headlamp of  automobile by case-based reasoning. Chinese Journal of Engineering Design, 2014, 21(4): 315-322.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2014.04.002    或    https://www.zjujournals.com/gcsjxb/CN/Y2014/V21/I4/315

[1] 孙启臣, 季节, 秦俊杰, 赖小明. 月面采样钻具锁合随动式限幅机构研究[J]. 工程设计学报, 2018, 25(6): 735-740.
[2] 潘骏, 周文文, 陈文华, 靳哲锋, 陈晓英. 引信自动设定机构的方案创新与设计[J]. 工程设计学报, 2001, 8(3): 122-126.
[3] 高峰, 冯培恩, 高宇. 挖掘机器人柔性液压系统的方案设计[J]. 工程设计学报, 2001, 8(3): 105-108.