Please wait a minute...
工程设计学报
工程设计学报  2014, Vol. 21 Issue (6): 589-595    DOI: 10.3785/j.issn. 1006-754X.2014.06.015
通用零部件设计     
板式阀-插装阀混合的复杂集成块元件布局设计
白金伟，牛文铁
天津大学 机构理论与装备设计教育部重点实验室，天津 300072
Components layout design of complex manifold block with both plate valve and cartridge valve
BAI Jin-wei， NIU Wen-tie
Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education， Tianjin University， Tianjin 300072， China
 全文: PDF  HTML
摘要： 液压集成块外部元件布局设计与内部油路连通设计的强耦合效应是妨碍其实现自动设计的核心问题．系统归纳总结了2类元件布局经验知识，即隐含于各类标准、技术规范与大量工程实例中文档化设计知识，以及专家在长期工程实践中积累的经验知识．在此基础上提出了一种基于知识和规则推理的板式阀插装阀混用的液压集成块元件布局设计方法．由于布局经验知识与规则综合考虑了后续油路路径规划，元件的安装、调试与维护等方面的需求，因此极大降低了集成块设计的复杂程度．该方法与虚拟设计技术或智能优化算法相结合，为液压集成块的智能优化设计提供了一条有效途径．
关键词： 液压集成块;  元件布局;  经验知识与规则    
Abstract: The strong coupling effect， which results from external components layout design and internal flow paths connection design， is a crucial issue to prevent the automatic design in hydraulic manifold block. The empirical knowledge of components layout was systematically classified as two types: documented knowledge existing in standards， technical specification and engineering design， and expertise accumulated by human experts in longterm engineering practice. And then based on knowledge and rule reasoning， a design methodology for components layout was proposed for hydraulic manifold block with both plate valve and cartridge valve. Because the layout empirical knowledge and rules take subsequent path planning， installation， adjustment and maintenance of components into overall consideration， the design complexity of manifold block was reduced greatly. The proposed method can be combined with virtual design technology or intelligent optimization algorithm to provide an effective approach for intelligent optimum design of hydraulic manifold block．
Key words: hydraulic manifold block    components layout    empirical knowledge and rules
收稿日期: 2014-07-01 出版日期: 2014-12-28
基金资助:

国家自然科学基金资助项目(51275340)
作者简介: 白金伟（1990—），男，天津人，硕士生，从事设计理论与方法研究，E-mail：baijinwei@tju.edu.cn. 通信联系人：牛文铁（1971—），男，内蒙古赤峰人，副教授，博士，从事设计理论与方法及数控机床数字化设计研究，E-mail：niuwentie@tju.edu.cn.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

白金伟，牛文铁. 板式阀-插装阀混合的复杂集成块元件布局设计[J]. 工程设计学报, 2014, 21(6): 589-595.

BAI Jin-wei， NIU Wen-tie. Components layout design of complex manifold block with both plate valve and cartridge valve. Chinese Journal of Engineering Design, 2014, 21(6): 589-595.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn. 1006-754X.2014.06.015    或    https://www.zjujournals.com/gcsjxb/CN/Y2014/V21/I6/589

[1] 叶冰, 陈鹰. 液压集成块三维参数化设计研究[J]. 工程设计学报, 2001, 8(2): 88-92.