Please wait a minute...
工程设计学报
工程设计学报  2013, Vol. 20 Issue (2): 119-125    
工程设计理论、方法与技术     
直升机数字化装配工艺设计与三维AO构建
 李志华1, 钟志伟1, 王兴起2, 王毅刚2
1. 杭州电子科技大学 机械工程学院，浙江 杭州 310018；
2. 杭州电子科技大学 计算机学院，浙江 杭州 310018
The design of digital assembly process and three-dimensional AO for helicopter
 LI  Zhi-Hua1, ZHONG  Zhi-Wei1, WANG  Xing-Qi2, WANG  Yi-Gang2
1. School of Mechanical Engineering， Hangzhou Dianzi University， Hangzhou 310018， China;
 2. School of Computer Science， Hangzhou Dianzi University， Hangzhou 310018， China
 全文: PDF(828 KB)   HTML
摘要： 飞机装配工艺设计过程及工艺数据的组织管理是当前飞机数字化制造技术研究中的一个关键问题．在基于模型定义技术的基础上，提出了直升机数字化装配工艺设计与三维装配指令（assembly order， AO）构建的方法．通过对DPE软件进行客户化定制和脚本开发，优化了数字化装配工艺设计过程，实现了AO文本的自动输出，缩短了装配指令的编写周期；通过对DPE与3DVIA Composer软件的集成开发，实现了三维AO的构建，从而为装配现场可视化奠定了基础，较好地解决了传统装配指令对装配现场指导不生动、不直观等问题．
关键词： 装配工艺设计;  装配工艺仿真;  三维AO    
Abstract: The procedure of aircraft assembly process planning and the management of process data are key issues in the field of aircraft digital manufacturing. On the basis of the technology of model-based definition， the method of digital assembly process planning and threedimensional assembly order building for helicopter was proposed. We optimized the digital assembly process planning， realized AO text output automatically and reduced assembly order writing cycle by customization and script development of DPE software. Meanwhile，the integrated development of the DPE with 3DVIA Composer software enabled us to establish three-dimensional AO， therefore a foundation for assembling field visualization is laid and the lack of lively and intuitive in the traditional assembly order on assembly field is addressed．
Key words: assembly process planning    assembly process simulation    three-dimensional AO
出版日期: 2013-04-28
基金资助:

国防基础科研计划项目（A3920110002）；浙江省自然科学基金资助项目（Y1100901）．
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
李志华
钟志伟
王兴起
王毅刚

引用本文:

李志华, 钟志伟, 王兴起, 王毅刚. 直升机数字化装配工艺设计与三维AO构建[J]. 工程设计学报, 2013, 20(2): 119-125.

LI Zhi-Hua, ZHONG Zhi-Wei, WANG Xing-Qi, WANG Yi-Gang. The design of digital assembly process and three-dimensional AO for helicopter. Chinese Journal of Engineering Design, 2013, 20(2): 119-125.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2013/V20/I2/119

No related articles found!