Please wait a minute...
工程设计学报
工程设计学报  2013, Vol. 20 Issue (1): 49-54    
机电一体化和智能化系统设计理论、方法与技术     
PDF策略在变载荷高性能控制系统中的设计及仿真
 李波, 唐猛
西南交通大学 机械工程学院智能机电技术研究所，四川 成都 610031
Design and performance simulation in integrated platform control system based on PDF algorithm for variedload object
 LI  Bo, TANG  Meng
Institute of Intelligent Mechatronic Technology, School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031， China
 全文: PDF(760 KB)   HTML
摘要： 为了实现非线性变化的变载荷负载系统的高性能控制，通过集成基于MATLAB的PDF（伪微分反馈）控制器模型、PMSM电机驱动及控制模型和基于ADAMS的执行传动机构和负载实体三维模型的方法，建立基于PDF控制策略和变载荷负载特性的控制系统设计和性能仿真模型，实现基于PMSM伺服电机驱动变载荷负载对象的控制系统集成设计和系统异构模型集成仿真．同时，在该系统模型构架基础上，进行PDF控制器设计和仿真验证．通过与传统PID算法的控制仿真结果比较，表明了PDF控制算法在变载荷负载情况下的控制精度、抗干扰能力、鲁棒性等方面的特点及在一定程度上较PID算法的优越性．
关键词： 伪微分反馈;  变载荷;  系统集成仿真    
Abstract: To achieve high control performance of nonlinear variedload system， through the method of integrated with PDF （pseudo differential feedback） controller model, PMSM motor drive and controller model based on MATLAB， as well as the implementation drive mechanism and load entity threedimensional in ADAMS environment， the paper established the control system design and performance simulation model based on PDF control strategy and variable load characteristics， and realized variableload object control system integration design and system integration of heterogeneous model simulation. Based on the platform of the system， a PDF controller was designed and control performance was analyzed by simulation. Comparing with the results of control simulation based on the traditional PID control algorithm， the final result shows that the PDF control algorithm has more advantages over the PID algorithm in the control accuracy， antiinterference ability， robustness and convenient characteristics under the variedload object on the certain degree．
Key words: pseudo differential feedback    varied-load    system integration simulation
出版日期: 2013-02-28
基金资助:

中央高校基本科研业务费专项资金创新项目(SWJTU11CX024)．
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
李波
唐猛

引用本文:

李波, 唐猛. PDF策略在变载荷高性能控制系统中的设计及仿真[J]. 工程设计学报, 2013, 20(1): 49-54.

LI Bo, TANG Meng. Design and performance simulation in integrated platform control system based on PDF algorithm for variedload object. Chinese Journal of Engineering Design, 2013, 20(1): 49-54.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2013/V20/I1/49

[1] 许 翔, 杨定富, 索文超, 刘 刚. 基于时变载荷的齿轮摩擦功率损失计算研究[J]. 工程设计学报, 2010, 17(3): 224-228.
[2] M.Wagner, 丁培番, 陈巍. 焊接结构零件的疲劳强度——焊有侧板的平板零件结构应力设计方案[J]. 工程设计学报, 2000, 7(1): 37-41.