Please wait a minute...
工程设计学报
工程设计学报  2000, Vol. 7 Issue (4): 55-58    
工程设计理论、方法与技术     
计算机辅助质量控制中显著性检验的程序实现研究
 阳培, 张琳娜, 陈江义, 赵凤霞
郑州工业大学机电学院, 河南郑州, 450002
Study of the Significance Test Program in Computer Aided Quality Control
 YANG  Pei, ZHANG  Lin-Na, CHEN  Jiang-Yi, ZHAO  Feng-Xia
College of Mechanical & Electronic, Zhengzhou University of Technology , Zhengzhou 450002, China
 全文: PDF(165 KB)   HTML
摘要： 随着计算机辅助质量控制系统的发展，显著性检验作为质量管理和质量控制中的必备工具，也面临着程序化的问题。针对这一问题，本文分析了显著性检验程序化的关键性问题，并以Ｆ检验为例作了具体的剖析和程序实现，提出用数值积分、进退法与二分法相结合的数值方法来解决这一关键问题，通过实例验证与分析，获得了较好的解答。
关键词： 显著性检验;  数值积分;  进退法;  二分法    
Abstract: With the development of Computer Aided Quality Control System, sig nificance test , as a necessary tool of quality management and quality control, is faced w ith the problem of program. In order to solve the problem, this paper analyzes the key methods of sig nificance test program and brings forward one method w hich adopt s numerical integrat ion and advanced & retreat method and dichotomy numerical methods to solve it . The F test , as a typical method of significance test, w as analyzed and programmed concretely. At last, satisfactory solut ion w as obtained throug h the test and verif icat ion of some examples.
Key words: significance test    numerical integration    advance &    retreat method    dichotomy
出版日期: 2000-12-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
阳培
张琳娜
陈江义
赵凤霞

引用本文:

阳培, 张琳娜, 陈江义, 赵凤霞. 计算机辅助质量控制中显著性检验的程序实现研究[J]. 工程设计学报, 2000, 7(4): 55-58.

YANG Pei, ZHANG Lin-Na, CHEN Jiang-Yi, ZHAO Feng-Xia. Study of the Significance Test Program in Computer Aided Quality Control[J]. Chinese Journal of Engineering Design, 2000, 7(4): 55-58.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2000/V7/I4/55

No related articles found!