Please wait a minute...
工程设计学报
工程设计学报  2000, Vol. 7 Issue (4): 13-16    
工程设计理论、方法与技术     
配制配合中实际尺寸测量误差对配合公差的影响
 刘亚南1, 周泗忠1, 胡献森1, 石松林1, 吴通2
1. 中国科学院西安精密机械研究所, 西安 710068;
2. 西北工业大学, 西安 710072
The Effect on Conjugation Tolerance from the Measurement Error of Real Dimension in Course of Deployment and Conjugation
 LIU  Ya-Nan1, ZHOU  Si-Zhong1, HU  Xian-Sen1, SHI  Song-Lin1, WU  Tong2
1. Xi'an Institute of Optical & Precision Mechanics, Chinese Academy of Sciences, Xi'an 710068, China;
2. Northwestern Polytechnical University, Xi'an 710027, China
 全文: PDF(186 KB)   HTML
摘要： 阐述了在配制配合中由于先加工件实际尺寸与测量误差的来源及其所引起的配合公差的变化以及它对配合件配合性质的影响, 给出了配制配合公差的计算方法和在单件小批生产时配合公差超出给定值的可能性。最后还给出了为保证配制配合设计和实际尺寸检测时应采取的措施。
关键词： 配制配合;  测量误差;  配合公差;  配合性质    
Abstract: This paper elaborates on the change of conjugat ion tolerance caused by the real measurement error of part machined previously and the effect on conjugation quality of the conjugative part coming with jumbo size and the main origins of measurement error. And it also depicts the computational methods to conjugate tolerance and the potentiality that tolerance exceeds the fixed value in single or small volume product ion. Finally , in order to guarantee conjugate quality , it submit s the measure that should be taken in the cause of designing deployment and measuring the real dimension.
Key words: deployment and conjugation    measurement error    conjugation tolerance    conjugation quality
出版日期: 2000-12-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
刘亚南
周泗忠
胡献森
石松林
吴通

引用本文:

刘亚南, 周泗忠, 胡献森, 石松林, 吴通. 配制配合中实际尺寸测量误差对配合公差的影响[J]. 工程设计学报, 2000, 7(4): 13-16.

LIU Ya-Nan, ZHOU Si-Zhong, HU Xian-Sen, SHI Song-Lin, WU Tong. The Effect on Conjugation Tolerance from the Measurement Error of Real Dimension in Course of Deployment and Conjugation[J]. Chinese Journal of Engineering Design, 2000, 7(4): 13-16.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2000/V7/I4/13

[1] 张庆英, 朱芳莉, 张福斌. 测量检验中的误收、误废和损失函数分析[J]. 工程设计学报, 2000, 7(4): 92-94.
[2] 马和, 赵丽娟, 王天煜. 激光在跳动误差测量中的应用[J]. 工程设计学报, 2000, 7(4): 95-97.