Please wait a minute...
工程设计学报
工程设计学报  2000, Vol. 7 Issue (3): 32-34    
工程设计理论、方法与技术     
评定直线度误差的新算法——缩小约束域的有效特征点法
 邓圭玲, 段吉安
中南工业大学机电工程学院, 湖南长沙410083
A New Algorithm for Evaluating Straightness Error: the Valid Characteristic Point Method with the Rapidly Contracted Constraint Zone
 DENG  Gui-Ling, DUAN  Ji-An
College of Mechanical and Electric Engineering, Central South University of Technology, Changsha 410083, China
 全文: PDF(136 KB)   HTML
摘要： 提出了最小区域法评定直线度误差的新算法——缩小约束域的有效特征点法。建立了算法的数学模型, 阐明了算法基本原理; 新算法应用相间准则和特征点搜索包容直线斜率, 自动建立最小区域包容直线斜率的约束域并使之快速缩小, 能快速、准确地搜索出最小区域包容直线的斜率并获得直线度误差的最小值。大量算例证实新算法首轮搜索成功率高, 计算速度快, 迭代次数小, 算法可推广应用于其他形状误差的最小区域法评定, 亦可用于实时计算机辅助测量系统。
关键词： 最小区域法;  约束域;  特征点;  包容直线斜率;  相间准则;  直线度    
Abstract: A new algorithm of minimum zone method for evaluating straightness error is put forward in this paper. It is the valid characteristic point method with the rapidly contracted constraint zone. Its mathematical model is established and its fundamental is illust rated in detail, also, its basic procedure is described. By applying the judging criteria of alternate and characteristic points to search the gradient of enveloping line, the new algorithm sets up automatically a constraint zone of the gradient of the enveloping line of the minimum zone and contracts it rapidly. It Searches out quickly the gradient of the enveloping line of the minimum zone and gets exactly the minimum value of the straightness error. A large number of examples show that the new algorithm has many advantages such as a high ratio of success in first searching, fast calculation speed and few iteration. The new algorithm can be popularized for evaluating other form error. It can also be applied to compute assistant measuring system on line.
Key words: the minimum zone method    the constraint zone    characteristic point    gradient of enveloping line    criteria of alternate    straightness
出版日期: 2000-09-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
邓圭玲
段吉安

引用本文:

邓圭玲, 段吉安. 评定直线度误差的新算法——缩小约束域的有效特征点法[J]. 工程设计学报, 2000, 7(3): 32-34.

DENG Gui-Ling, DUAN Ji-An. A New Algorithm for Evaluating Straightness Error: the Valid Characteristic Point Method with the Rapidly Contracted Constraint Zone[J]. Chinese Journal of Engineering Design, 2000, 7(3): 32-34.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2000/V7/I3/32

[1] 李宝志, 倪洪启, 林思雨, 孟宪春. 基于图像识别的波纹补偿器轴向尺寸检测方法[J]. 工程设计学报, 2022, 29(1): 10-19.
[2] 赵延超, 武美萍, 王全龙, 吴克中. 喷油器体深孔直线度加工工艺参数优化[J]. 工程设计学报, 2018, 25(3): 302-308,314.
[3] 茅健, 曹衍龙. 基于粒子群算法的空间直线度误差评定[J]. 工程设计学报, 2006, 13(5): 291-294.
[4] 陆国栋, 许鹏, 徐文鹏. 人体扫描模型的特征提取方法研究[J]. 工程设计学报, 2005, 12(4): 247-251.
[5] 刘玉生. 基于自由变动的直线度公差数学模型[J]. 工程设计学报, 2002, 9(1): 27-30.
[6] 夏琪, 蔡敏. AutoCAD 中基于超图约束驱动参数化设计的实现[J]. 工程设计学报, 2000, 7(4): 43-47.
[7] 杨练根, 李建林, 谢铁邦, 李柱. 基于虚拟仪器界面的大轴轴线直线度误差测量系统[J]. 工程设计学报, 2000, 7(4): 83-85.