Please wait a minute...
工程设计学报
工程设计学报  2003, Vol. 10 Issue (3): 121-125    
工程设计理论、方法与技术     
拓扑与形状优化用于有效的产品设计
[德]Christian Affolter，Bernhard Weisse
翻译：陈 巍 译校：吕新生
Topology and form optimization for efficient product design
 全文: PDF(244 KB)   HTML
摘要： 介绍了基于有限元法(FEM)的计算机辅助结构优化方法． 拓扑优化有助于设计新零件的形状，形状优化则通过表面几何形状的局部调整改善零件的刚度或使用寿命．
Abstract: Methods of computer aided structural optimization，which are based on the finite-element-method(FEM )，are presented．The topology optimization helps in designing the shape of a new component．The shape optimization improves the component with respect to stiffness or fatigue life by a local adjustment of the surface geometry．
出版日期: 2003-06-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
Christian Affolter
Bernhard Weisse

引用本文:

Christian Affolter, Bernhard Weisse. 拓扑与形状优化用于有效的产品设计[J]. 工程设计学报, 2003, 10(3): 121-125.

Christian Affolter, Bernhard Weisse. Topology and form optimization for efficient product design[J]. Chinese Journal of Engineering Design, 2003, 10(3): 121-125.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2003/V10/I3/121

No related articles found!