机电一体化和智能化系统设计理论、方法与技术 |
|
|
|
|
盾构管片拼装试验台监控系统设计 |
杨旭1, 龚国芳1, 杨华勇1, 陈馈2, 王林涛1 |
1.浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027;
2.中铁隧道集团 盾构及掘进技术国家重点实验室,河南 郑州 450003 |
|
Design of monitor and control system for a segment assembly test bed of shield machine |
YANG Xu1, GONG Guo-Fang1, YANG Hua-Yong1, CHEN Kui2, WANG Lin-Tao1 |
1.State Key Lab of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China;
2.China State Key Lab of Shield Machine and Boring Technology, China Railway Tunnel Group Co., Ltd., Zhengzhou 450003, China |
引用本文:
杨旭, 龚国芳, 杨华勇, 陈馈, 王林涛. 盾构管片拼装试验台监控系统设计[J]. 工程设计学报, 2013, 20(6): 534-538.
YANG Xu, GONG Guo-Fang, YANG Hua-Yong, CHEN Kui, WANG Lin-Tao. Design of monitor and control system for a segment assembly test bed of shield machine. Chinese Journal of Engineering Design, 2013, 20(6): 534-538.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/
或
https://www.zjujournals.com/gcsjxb/CN/Y2013/V20/I6/534
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|