Please wait a minute...
工程设计学报
工程设计学报  2006, Vol. 13 Issue (5): 336-341    
工程设计理论、方法与技术     
WA-21M数控系统数控化改造XA5032铣床
 侯书林1, 王洪章1,2, 常青1,2
1. 中国农业大学 工学院， 北京 100083;
 2. 张家口职业技术学院， 河北 张家口 075000
NC transformation of XA5032 milling machine with WA-21M NC system
 HOU  Shu-Lin1, WANG  Hong-Zhang1,2, CHANG  Qing1,2
1. College of Engineering, China Agricultural University, Beijing 100083, China;
2. Zhangjiakou Vocatainal Technical College, Zhangjiakou 075000, China
 全文: PDF(329 KB)   HTML
摘要： 机床数控化改造可大大提高设备的自动化能力和生产率水平，满足企业对生产设备更高的要求。通过对XA5032铣床改造方案分析和进给传动系统的设计计算，应用WA-21M数控系统，完成铣床的数控化改造。阐述了数控系统的选配原则及选配方案、伺服电机的选择与电气系统的数控化改造方案，分析了系统控制软件的组成和工作原理。机床改造后，机床精度在X，Y，Z向步进精度为0.005，0.005，0.01 mm/setp；轴向定位精度为0.015 mm；重复定位精度为0.008 mm。改造后加工精度和生产率有较大提高，改造取得成功，为提高企业数控化率提供了一条切实可行的途径。
关键词： 数控系统;  数控改造;  铣床    
Abstract: Milling machine numerical control transformation may greatly enhance automatic capability and productivity level of equipments and fulfill the higherrequirements of enterprises on equipments. Through plan analysis of XA5032 milling machine transformation and design calculation of feeding transmission system, by adopting WA-21M NC system, NC transformation of milling machines is completed; selection principle and selection plan of NC system, servo electrical machinery choice, electrical system NC transformation plan and system control softwarecomposition and work principle are elaborated. After transformation, step precision in X,Y,Z is 0.005,0.005,0.01 mm/setp; axial location accuracy is 0.015 mm; repetition location accuracy is 0.008 mm. Processing precision and productivity are greatly increased, which demonstrates the success of transformation. Meantime, it provides a feasible way for enterprises to enhance rate of NC.
Key words: NC system    NC transformation    milling machine
出版日期: 2006-10-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
侯书林
王洪章
常青

引用本文:

侯书林, 王洪章, 常青. WA-21M数控系统数控化改造XA5032铣床[J]. 工程设计学报, 2006, 13(5): 336-341.

HOU Shu-Lin, WANG Hong-Zhang, CHANG Qing. NC transformation of XA5032 milling machine with WA-21M NC system[J]. Chinese Journal of Engineering Design, 2006, 13(5): 336-341.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2006/V13/I5/336

[1] 高志来, 邱自学, 任东, 崔德友, 徐新朋. 桥式龙门铣床横梁结构设计与优化[J]. 工程设计学报, 2019, 26(1): 56-64.
[2] 陈婵娟, 袁 斌. 新型陶瓷快速成型装置数控系统的研究[J]. 工程设计学报, 2009, 16(5): 335-339.
[3] 盛忠起, 蔡光起. 基于虚轴机床的检测系统设计[J]. 工程设计学报, 2001, 8(3): 135-138.