Please wait a minute...
工程设计学报  2006, Vol. 13 Issue (5): 325-328    
工程设计理论、方法与技术     
一种宽带高隔离度SPDT开关的设计与实现
 张晨新, 麻来宣, 梁建刚, 龙戈农
空军工程大学 导弹学院, 陕西 三原 713800
Design and implementation of broadband and high isolation
 ZHANG  Chen-Xin, MA  Lai-Xuan, LIANG  Jian-Gang, LONG  Ge-Nong
Missile Institute, Air Force Engineering University, Sanyuan 713800, China
 全文: PDF(174 KB)   HTML
摘要: 采用多个PIN管设计并制作了一种串/并联结构的宽带高隔离度微带单刀双掷(single pole double throw,SPDT)开关。首先建立了所用型号的PIN管开路、短路的等效电路模型;然后借助于CAD软件Serenade进行了电路仿真和参数优化,得到了很好的仿真结果;最后设计出电路制版图并制作了经济实用的微带开关,经过实验测量达到了技术指标要求。
关键词: 宽带单刀双掷开关插损隔离度    
Abstract: A type of series-parallel single pole double throw (SPDT) switch with broadband and high isolation was designed and made up by utilizing several PIN diodes. First of all, the special PIN diode equivalent circuit models of open circuit and short circuit were set up. Then the circuit simulation and parameter optimization were carried out by using CAD software Serenade to get good results. In the end, the circuit plate-making plot and economically practical micro-strip switch were fabricated, and the qualification was reached by testing.
Key words: broadband    single pole double throw (SPDT)    insertion loss    isolation
出版日期: 2006-10-28
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
张晨新
麻来宣
梁建刚
龙戈农

引用本文:

张晨新, 麻来宣, 梁建刚, 龙戈农. 一种宽带高隔离度SPDT开关的设计与实现[J]. 工程设计学报, 2006, 13(5): 325-328.

ZHANG Chen-Xin, MA Lai-Xuan, LIANG Jian-Gang, LONG Ge-Nong. Design and implementation of broadband and high isolation[J]. Chinese Journal of Engineering Design, 2006, 13(5): 325-328.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2006/V13/I5/325

[1] 田为广,徐海黎,陈妍,朱倚娴,刘熙. 可变车道隔离护栏运载机器人系统及其控制策略[J]. 工程设计学报, 2022, 29(2): 237-246.
[2] 李咏乐,南敬昌,游长江,杜学坤,蒋 迪. 基于改进型匹配网络的宽带高效率E类功放的设计[J]. 工程设计学报, 2015, 22(2): 178-184.
[3] 李丹, 童创明, 彭鹏, 余定旺, 邹雄. 基于EBG结构的基片集成波导超宽带带通滤波器[J]. 工程设计学报, 2013, 20(1): 65-69.
[4] 宗彬锋, 王光明, 逯 科. 基于新型H形DGS超宽带低通滤波器设计[J]. 工程设计学报, 2011, 18(6): 463-466.
[5] 许河秀, 王光明, 张晨新, 逯 科. 基于分形互补开口环谐振器的复合左右手传输线研究[J]. 工程设计学报, 2011, 18(1): 71-76.
[6] 曾宪峰, 张晨新, 曾会勇, 谢聪. 新型古币形超宽带分形印刷天线的设计[J]. 工程设计学报, 2010, 17(5): 392-395.
[7] 单谭生, 付红卫. 探地雷达收发开关系统的设计[J]. 工程设计学报, 2009, 16(6): 452-456.