Please wait a minute...
工程设计学报
工程设计学报  2005, Vol. 12 Issue (2): 97-100    
工程设计理论、方法与技术     
可调扭矩保护经济型数控车床浮动丝锥夹具设计
 项占琴, 程绍慧
浙江大学 现代制造工程研究所，浙江 杭州 310027
Design on floating screw tap clamp on economical numerical control lathe with djustable torque
 XIANG  Zhan-Qin, CHENG  Shao-Hui
Institute of Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF(341 KB)   HTML
摘要： 主要介绍一种用于经济型数控车床自动攻丝的丝锥夹具的原理及设计,一方面能很大程度上降低工人劳动强度，另一方面能大大提高生产效率及产品质量。使用简单方便，在目前我国中低档数控车床占大多数的国情下,有着很广阔的应用前景。
Abstract: This paper focuses on principles and producing method of a screw tap clamp that can be applied on economical numerical control lathe. The utilization of such clamp can distinctly decrease labor hardship of workers while greatly increase productivity and product quality. Furthermore, under the condition that, in China, the majority of numerical control lathes are small and medium types, its easy operation display it a promising applying prospect.
Key words: numerical control lathe    screw tap clamp    automatically tap
出版日期: 2005-04-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
项占琴
程绍慧

引用本文:

项占琴, 程绍慧. 可调扭矩保护经济型数控车床浮动丝锥夹具设计[J]. 工程设计学报, 2005, 12(2): 97-100.

XIANG Zhan-Qin, CHENG Shao-Hui. Design on floating screw tap clamp on economical numerical control lathe with djustable torque[J]. Chinese Journal of Engineering Design, 2005, 12(2): 97-100.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2005/V12/I2/97

No related articles found!