Please wait a minute...
工程设计学报
工程设计学报  2001, Vol. 8 Issue (3): 112-118    
工程设计理论、方法与技术     
机电一体化系统原理解模型的建立
F.Kallmeyer, J.Gausemeier
翻译:刁元康　　译校:吕新生
Modeling Principle Solutions of Mechatronic Systems
 全文: PDF(472 KB)   HTML
摘要： 机械学、电子学、控制技术和软件技术的紧密结合(机电一体化)为机械制造业和其他相关行业提供了巨大的成功机遇,已有产品的成本-盈利比得以大幅度提高,全新产品得以出现.根据文献[1],介绍了机电一体化系统原理解一种集成的、半规范化的描述新方法的基础,从而为相关的工程学科在产品开发过程初期,与“方案设计”阶段的密切结合创造了重要的前提条件.
Abstract:  The close cooperation of mechanics, electronics, control engineering and software contains considerable chances of succsess for mechanical engineering and corresponding branches. On the one hand the cost-benefit ration of known products can grow considerably. On the other hand completely new products become possible. The following paper presents the basics of a new method specifying principle solutions of mechatronic systems in an integrated semi-formal manner according to [1]. Thus an important presupposition for the coorperation of the technical domains involved is established in the early stage“conceptional design”of the design process.
出版日期: 2001-09-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
F.Kallmeyer
J.Gausemeier

引用本文:

F.Kallmeyer, J.Gausemeier. 机电一体化系统原理解模型的建立[J]. 工程设计学报, 2001, 8(3): 112-118.

F.Kallmeyer , J.Gausemeier . Modeling Principle Solutions of Mechatronic Systems[J]. Chinese Journal of Engineering Design, 2001, 8(3): 112-118.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2001/V8/I3/112

No related articles found!