Please wait a minute...
工程设计学报
工程设计学报  2006, Vol. 13 Issue (3): 175-178    
工程设计理论、方法与技术     
基于扩展“变球法”的颜色量化分析
 刘妹琴, 程红梅
浙江大学 电气工程学院， 浙江 杭州 310027
Color quantification analysis based on improved change ball algorithm
 LIU  Mei-Qin, CHENG  Hong-Mei
College of Electrical Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF(523 KB)   HTML
摘要： 系统阐述了各种颜色量化方法，提出了利用改进了的“变球法”颜色量化算法进行颜色量化，满足了在纹织CAD设计中，设计人员因为工艺或者设计的需要，保留原图片上几种特定的颜色的要求。“变球法”从人的视觉的适应性角度出发，保证了所选代表色的合理性，一定程度上改良了纹织CAD的工艺，较好满足了工艺或设计的要求和需要。仿真结果表明，运用该算法的颜色量化效果好，误差小，基本接近原图。实际生产中的误差也得到了很好的控制，保证了其准确性。
关键词： 颜色量化;  八叉树算法;  “  变球法”  扩展“  变球法&rdquo    
Abstract: Quantification method of colors is expounded and a new method to quantify colors by employing improved changeball algorithm is proposed. This method meets the requirements of keeping some special colors of the original pictures, which is required by process or design of designers in design of jacquard CAD. Starting from the perspective of adaptability of human vision, changeball algorithm guarantees the rationality of the selected representative colors and can improve the process of jacquard CAD. Moreover, changeball algorithm can fulfill the demands of process and design. Simulation results indicate that color quantification effect of this algorithm is good, while its error is small. During real production, error can be well controlled and veracity is well assured.
Key words: color quantization    octree quantization    change ball    the improved change ball
出版日期: 2006-06-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
刘妹琴
程红梅

引用本文:

刘妹琴, 程红梅. 基于扩展“变球法”的颜色量化分析[J]. 工程设计学报, 2006, 13(3): 175-178.

LIU Mei-Qin, CHENG Hong-Mei. Color quantification analysis based on improved change ball algorithm[J]. Chinese Journal of Engineering Design, 2006, 13(3): 175-178.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2006/V13/I3/175

[1] 姜立春, 王国伟, 赵奎. 基于自稳系数法的采空区群“短板”单元空区甄别及实例分析[J]. 工程设计学报, 2017, 24(5): 503-510.
[2] 刘自范,陈艳红,张鬲君,田华泉. N-bike折叠自行车的设计研究[J]. 工程设计学报, 2012, 19(2): 156-160.
[3] 陈崇炯. 压力容器快开门安全锁紧装置的设计[J]. 工程设计学报, 2012, 19(1): 67-70.
[4] 徐军民, 郭明, 陈宗农, 詹建潮. 基于非线性刚度约束下的精密机床主轴系统优化设计[J]. 工程设计学报, 2002, 9(2): 73-76.