Please wait a minute...
工程设计学报  2012, Vol. 19 Issue (4): 263-267    
工程设计理论、方法与技术     
基于机会维修策略的预防性维修优化模型研究
 狄鹏1, 黎放1, 杨元2
1.海军工程大学 管理工程系,湖北 武汉 430033;
2.武汉军械士官学校,湖北 武汉 430075
Optimal preventive maintenance model based on opportunistic maintenance policy
 DI  Peng1, LI  Fang1, YANG  Yuan2
1. Department of Management Engineering, Naval University of Engineering, Wuhan 430033, China; 
2. Wuhan Ordnance Academy, Wuhan 430075, China
 全文: PDF(710 KB)   HTML
摘要: 为了利用系统内故障部件维修的机会,考虑部件之间在维修方面存在的相关性情况,提出了将机会维修信息融入系统预防性维修的优化模型.该模型在比较按机会预防性维修和按计划预防性维修期望效益的基础上,以系统内故障时机为优化变量、部件维修费用率最小化为目标进行系统预防性维修优化,使确定部件在不同的故障来源时机可提前预防性维修的阈值.最后通过算例,表明不同故障的机会维修阈值对部件预防性维修效果的影响差异,为系统预防性维修决策提供有力的支持.
关键词: 预防性维修机会维修维修优化维修相关性    
Abstract: In order to capture the chance of fault components maintenance in a system,and consider maintenance dependence between the parts in the system, an optimization model which put opportunistic maintenance information into the decisionmaking of system preventive maintenance was proposed. According to the opportunistic preventive maintenance and preventive maintenance expected benefits plan,The model treats fault time in the system as optimized variables and components maintenance fee rates to get the minimum target to do system preventive maintenance optimization, and make sure parts in different fault source ahead of time the preventive maintenance of the threshold. Finally, the example shows that the effect to preventive maintenance is different under the opportunity thresholds of different fault parts, which can provide strong decision support for the system preventive maintenance.
Key words: preventive maintenance    opportunistic maintenance    maintenance optimization    maintenance dependence
出版日期: 2012-08-28
基金资助:

总装备部技术基础课题(4314231428);海军工程大学基金资助项目(HGDSK2008E27)

服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
狄鹏
黎放
杨元

引用本文:

狄鹏, 黎放, 杨元. 基于机会维修策略的预防性维修优化模型研究[J]. 工程设计学报, 2012, 19(4): 263-267.

DI Peng, LI Fang, YANG Yuan. Optimal preventive maintenance model based on opportunistic maintenance policy. Chinese Journal of Engineering Design, 2012, 19(4): 263-267.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2012/V19/I4/263

No related articles found!