Please wait a minute...
工程设计学报
工程设计学报  2002, Vol. 9 Issue (2): 53-59    
工程设计理论、方法与技术     
异地协同设计制造关键技术及系统实现
 张友良, 汪惠芬
南京理工大学CIMS研究所，江苏南京210094
Key technologies and system im plementation of distributed collaborative product design& manufacturing
 ZHANG  You-Liang, WANG  Hui-Fen
CIMS Institute，Nanjing University of Science& Technology，Nanjing 21 0094，China
 全文: PDF(346 KB)   HTML
摘要： 在分析制造业面临的新挑战以及网络化制造特点的基础上，提出了基于Web的异地协同设计制造系统的体系结构并开发了一个实际系统eCWS(e—cooperative work system )．详细介绍了该系统的功能和关键技术的实现，包括协同系统管理、协同工作管理、协同应用、约束管理和冲突消解、协同工具、安全控制、分布式产品数据管理等技术． 最后介绍了应用实例．
关键词： 网络化制造;  异地协同设计制造;  协同管理;  协同应用;  协同工具;  安全控制;  分布式产品数据管理    
Abstract: Based on the analysis of new challenges with which m anufacturing industry is faced and characteristics of networked manufacturing， the architecture of W eb—based distributed collaborative design and manufacturing system is put forward and an actual system— — eCW S(ecooperative work system )is developed．Then the main functions of this system and a series of key technologies to implement this system including collaborative system management，collaborative work management，collaborative application，constrain management and conflict resolving，collaborative tools，security control，distributed product data management，etc．are discussed in details． Finally an example of application is introduced．
Key words: networked manufacturing    distributed collaborative design and manufacturing    collaborative management    collaborative application    collaborative tools    security control    distributed product data management
出版日期: 2002-06-15
基金资助:

国防预研项目(18．1．2．4)
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
张友良
汪惠芬

引用本文:

张友良, 汪惠芬. 异地协同设计制造关键技术及系统实现[J]. 工程设计学报, 2002, 9(2): 53-59.

ZHANG You-Liang, WANG Hui-Fen. Key technologies and system im plementation of distributed collaborative product design& manufacturing[J]. Chinese Journal of Engineering Design, 2002, 9(2): 53-59.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2002/V9/I2/53

[1] 余强, 张海盛, 梁丽. 基于能力的制造资源模型研究[J]. 工程设计学报, 2006, 13(1): 13-16.