Please wait a minute...
工程设计学报
工程设计学报  2002, Vol. 9 Issue (1): 44-48    
工程设计理论、方法与技术     
双横臂双扭杆悬架中上下扭杆的刚度匹配和等强度设计
 邓寅虎1, 胡于进1, 杨颖超2
1.华中科技大学机械科学与工程学院,湖北武汉430074;
2.三江航天集团特种车辆技术中心,湖北武汉430023
Matching of rigidity and equip-intensity design of twin torsion bar in double wishbone suspension with twin torsion bar
 DENG  Yin-Hu1, HU  Yu-Jin1, YANG  Ying-Chao2
1. College of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074,China; 
2. Special Vehicle Technology Center of Sanjiang Space Group, Wuhan 430023,China
 全文: PDF(180 KB)   HTML
摘要： 通过对双横臂双扭杆悬架中上下扭杆的刚度匹配和等强度设计问题的研究,提出了扭杆的设计方法.分析了双横臂双扭杆悬架的导向机构模型简图,得到了导向机构的运动关系和进行悬架刚度计算的方程;以满足悬架载荷要求和悬架刚度要求为前提,分析了上下扭杆的刚度匹配条件;在上下扭杆在悬架运动时的强度始终相等的前提下,分析了上下扭杆的等强度条件.通过对扭杆直径和有效长度的实例计算,证明所提出的上下扭杆的刚度匹配和等强度设计的方法是可行的.
关键词： 双横臂双扭杆悬架;  导向机构;  刚度匹配;  等强度设计    
Abstract:  On the basis of analyzing the question about matching of rigidity and equip-intensity design of the twin torsion bar, the method of designing the torsion bars is formed. By analyzing the diagram of control bars of double wishbone suspension with twin torsion bar, the geometry characteristic of control bars and calculating method of the suspension' s rigidity are gotten. The question about matching of rigidity is analyzed to ensure suspension' s load and rigidity, and the question about equip-intensity design is analyzed to ensure the equal intensity of the torsion bars. The example proves that the method of matching of rigidity and equip-intensity design of the twin torsion bar is practicable.
Key words:  double wishbone suspension with twin torsion bar    control bars    matching of rigidi-ty    equip-intensity design
出版日期: 2002-03-15
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
邓寅虎
胡于进
杨颖超

引用本文:

邓寅虎, 胡于进, 杨颖超. 双横臂双扭杆悬架中上下扭杆的刚度匹配和等强度设计[J]. 工程设计学报, 2002, 9(1): 44-48.

DENG Yin-Hu, HU Yu-Jin, YANG Ying-Chao. Matching of rigidity and equip-intensity design of twin torsion bar in double wishbone suspension with twin torsion bar[J]. Chinese Journal of Engineering Design, 2002, 9(1): 44-48.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2002/V9/I1/44

[1] 贾慧波, 李程宇, 吴晓君, 刘小青, 李彦磊. 全向自动导引车导向机构设计及其运动控制研究[J]. 工程设计学报, 2018, 25(5): 546-552.
[2] 夏 磊，江浩斌. 基于刚度匹配的汽车保险杠防撞梁改进设计[J]. 工程设计学报, 2015, 22(1): 84-88.