Please wait a minute...
工程设计学报
工程设计学报  2009, Vol. 16 Issue (6): 469-472    
机电产品工程设计     
静态光谱分析检测及其软件实现
 余本国, 王建中
中北大学 信息与通信工程学院,山西 太原 030051
Static spectrum analysis detection and its software implementation
 YU  Ben-Guo, WANG  Jian-Zhong
School of Information and Communication Engineering, North University of China, Taiyuan 030051, China
 全文: PDF(3035 KB)   HTML
摘要： 在激光光谱分析中静态干涉法比传统机械扫描的稳定性好、实时性高,因此设计了一种基于静态傅里叶干涉具空间扫描型光谱分析算法,并在Visual Studio平台下采用C#编写了光谱分析软件.实验采用532，660，780，850，980 nm的多种激光器,经斜楔角度0.1°的静态傅里叶干涉具,得到干涉条纹,由CameraLink公司的M2CL型线阵CCD探测器采集干涉条纹,经光谱分析算法得到光谱信息.通过将本算法得到的光谱数据与采用Q8344A型光谱仪经Labview分析得到的光谱数据作对比,计算得到相似度大于95%,并给出误差及灵敏度分析.
关键词： 光谱检测;  静态傅里叶干涉具;  光谱分析软件;  光谱标定;  C#    
Abstract: The static interference method has better stability and realtime property than the traditional mechanical scanning method in laser spectrum analysis. A nonscanning spectrum analysis algorithm based on static Fourier transform spectrometer was developed, and the spectral analysis software was developed by C#. The experiment was carried out by using several kinds of lasers of 532, 660, 780, 850, 980 nm, the interference fringe was obtained by interfereing through the static Fourier spectrometer with a wedge angle of 0.1°. The interference fringes were collected by CameraLink M2CL-CCD detector and the spectrum information was gained from the proposed algorithm. Through the comparing between the spectrum data obtained from this algorithm with that from the Q8344A spectrometer on the Labview analysis platform, a similarity bigger than 95% was achieved combined with its error and sensitivity analysis．
Key words: spectrum detection    static Fourier transform spectrometer    spectrum analysis software    spectrum calibration    C#
出版日期: 2009-12-28
:  TP 311.56  
基金资助:

国家自然科学基金资助项目(20051203JJ).
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
余本国
王建中

引用本文:

余本国, 王建中. 静态光谱分析检测及其软件实现[J]. 工程设计学报, 2009, 16(6): 469-472.

YU Ben-Guo, WANG Jian-Zhong. Static spectrum analysis detection and its software implementation[J]. Chinese Journal of Engineering Design, 2009, 16(6): 469-472.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2009/V16/I6/469

No related articles found!