Please wait a minute...
工程设计学报
工程设计学报  2008, Vol. 15 Issue (5): 319-323    
工程设计理论、方法与技术     
低成本、便携式的EPS快速成形系统
 陈太喜, 尚仕波, 方 亮, 孙海波
中国矿业大学 机电工程学院, 江苏 徐州 221116
Low-cost and portable EPS rapid cutting system
 CHEN  Tai-Xi, SHANG  Shi-Bo, FANG   Liang, SUN  Hai-Bo
School of Mechanical & Electrical Engineering, China University of Mining and Technology, Xuzhou 221116, China
 全文: PDF(391 KB)   HTML
摘要： 针对目前聚苯乙烯泡沫塑料（EPS）加工的发展需要,研制了低成本、便携式的EPS快速成形系统.系统综合应用CAD/CAM技术、电机控制技术、计算机数控技术、先进制造技术等知识,确定系统的设计方案,开发了上位机软件系统,编程实现图形优化、图元排序、路径规划等一系列算法,将DXF文件中的图形信息转换为系统定制的加工指令并进行传输控制.最后测试了软件系统的功能并对样机进行加工试验,证明该系统易于使用,加工精度可以满足工程需要.
关键词： 快速成形;  聚苯乙烯泡沫塑料;  DXF文件    
Abstract: Due to the current development requirement of expanded polystyrene(EPS) manufacture, a low-cost and portable polystyrene foam cutting system was developed. This system integrated the knowledge of CAD/CAM, motor control, CNC, advanced manufacture to determine its design scheme, develop host computer software, and finally program graphical user interface (GUI) optimization, optimization sequencing of graphic elements based on DXF file and cutting path planning. Additionally, software functions were tested and a real foam part was cut in the system. It has been proved that the system is easy to use and dimension tolerance is small which can satisfy the requirement of engineering application．
Key words:  rapid prototyping    EPS         drawing exchange file
出版日期: 2008-10-28
基金资助:

陕西省工业攻关计划资助项目（2006）
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
陈太喜
尚仕波
方 亮
孙海波

引用本文:

陈太喜, 尚仕波, 方 亮, 孙海波. 低成本、便携式的EPS快速成形系统[J]. 工程设计学报, 2008, 15(5): 319-323.

CHEN Tai-Xi, SHANG Shi-Bo, FANG Liang, SUN Hai-Bo. Low-cost and portable EPS rapid cutting system[J]. Chinese Journal of Engineering Design, 2008, 15(5): 319-323.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2008/V15/I5/319

No related articles found!