Please wait a minute...
工程设计学报
工程设计学报  2008, Vol. 15 Issue (3): 170-172    
工程设计理论、方法与技术     
装配尺寸式的研究
 王晓慧, 李改全, 吉慧琴
太原科技大学 机械电子工程学院,山西 太原 030024
Study of assembly dimension formula
 WANG  Xiao-Hui, LI  Gai-Quan, JI  Hui-Qin
School of Mechanical and Electrical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, China
 全文: PDF(261 KB)   HTML
摘要： 以装配体内零件要素特征和装配关系信息量最大为目标,对装配体内的各种要素用文字进行描述；提出目标尺寸和相关尺寸概念,以装配基准为线索探索目标尺寸形成的过程,从而建立目标尺寸与相关尺寸之间关系的文字表达式——装配尺寸式,为计算机自动建立装配尺寸关系提供一条新的途径. 
关键词： 机械装配;  要素的文字表达;  装配尺寸关系的描述    
Abstract: By taking the maximum of information about the features of parts and assembly relationship in assembly as objective, the elements in assembly was described with words. The concept of target size and relevant size was presented, the forming process of target size by taking assembly datum as a clue was explored to establish the word expression, assembly dimension formula, of the relationship between target size and relevant size. This is a new way to automatically establish dimension relationship with computer.
Key words: mechanical assembly    description of standard    establishing method of assembly dimension formula
出版日期: 2008-06-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
王晓慧
李改全
吉慧琴

引用本文:

王晓慧, 李改全, 吉慧琴. 装配尺寸式的研究[J]. 工程设计学报, 2008, 15(3): 170-172.

WANG Xiao-Hui, LI Gai-Quan, JI Hui-Qin. Study of assembly dimension formula[J]. Chinese Journal of Engineering Design, 2008, 15(3): 170-172.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2008/V15/I3/170

null
No related articles found!