Please wait a minute...
工程设计学报
工程设计学报  2007, Vol. 14 Issue (1): 39-43    
工程设计理论、方法与技术     
基于汽车车身自动转接的PLC自动控制系统
 尤文强1, 王 洋2
1.华北科技学院 电子信息工程系, 北京 101601; 2.承德威伯输送机械有限公司，河北 承德 067001
PLC automatic control system for car body's auto-transfer
 YOU  Wen-Qiang1, WANG   Yang2
1. Department of Electronic Information Engineering, North China Instituteof Science & Technology,
Beijing 101601, China; 2. Chengde Webb Conveyer Company Limited, Chengde 067001, China
 全文: PDF(449 KB)   HTML
摘要： 汽车制造领域中，车身的输送、转接/转挂是实现生产高度自动化的重要环节。以 PLC为核心，采用Device Net现场总线控制方式，接收现场采集的检测信号，控制相应执行机构动作，应用滑橇式输送机，根据生产工艺输送汽车车身，对车身位置进行精确定位，完成车身的自动转接/转挂，确定最佳的物流状态。PLC+工业现场总线的控制系统大大提高了汽车生产线的自动化程度，减轻了工人的劳动强度，提高了生产效率，对现代工业起着越来越重要的作用。
关键词： 反向单轨输送机;  转挂/转接;  滑橇;  变速辊床    
Abstract: In automobile manufacture field, conveying, switching/hanging of car body are the most important chains to realize highly automatic manufacture. Taking PLC as core and adopting Device Net Site General-line Control mode, the testsignals collected on the site are received and the corresponding response can perform action. Conveying car body by utilizing skid conveyor and according to producing process can realize accurate orientation of car body position, achieve automatically switching/hanging of car body, and finally determine the best conveying condition. PLC and on-site General-line Control system greatly enhance theautomatic level of car producing line, reduce working intensity and then increase productivity. This plays a more and more important role in modern industry.
Key words: inverted monorail conveyor    switching/hanging    skid    power roller bed of the changing speed
出版日期: 2007-02-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
尤文强
王 洋

引用本文:

尤文强, 王 洋. 基于汽车车身自动转接的PLC自动控制系统[J]. 工程设计学报, 2007, 14(1): 39-43.

YOU Wen-Qiang, WANG Yang. PLC automatic control system for car body's auto-transfer[J]. Chinese Journal of Engineering Design, 2007, 14(1): 39-43.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2007/V14/I1/39

null
No related articles found!