Please wait a minute...
工程设计学报
工程设计学报  2005, Vol. 12 Issue (2): 65-69    
工程设计理论、方法与技术     
“三明治”零件机械连接技术的开发
［德］ Jrg Feldhusen, Alexander Kempf
翻译：刘全坤    译校：桂贵生
Mechanical joining technology for sandwich elements
 全文: PDF(694 KB)   HTML
摘要： “三明治”零件的主要优点是重量轻、刚性好，它特别适用于大型、高强度结构，但是在机械工程应用中几乎只用于次要场合，这主要是由于缺少可广泛应用的连接技术。介绍了研究工作中包括所有基本方案的系统论述和从系统工程设计角度对它进行评价。
Abstract: One of the essential advantages of sandwich elements is high rigidity combined with low weight. These characteristics are ideal for the realization of large structures subjected to stress. Nevertheless, in the application of mechanical engineering most of the sandwich elements are used for subordinate tasks. The substantial reason for this is the missing existance of a generally suitable joining technology for those elements. This essay represents the first part of the research project which is to describe the systematic development of all principle solutions and their evaluation on the basis of systematic engineering design.
出版日期: 2005-04-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
Jrg Feldhusen
Alexander Kempf

引用本文:

Jrg Feldhusen, Alexander Kempf. “三明治”零件机械连接技术的开发[J]. 工程设计学报, 2005, 12(2): 65-69.

Jrg Feldhusen, Alexander Kempf. Mechanical joining technology for sandwich elements[J]. Chinese Journal of Engineering Design, 2005, 12(2): 65-69.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2005/V12/I2/65

No related articles found!