基于实测数据的弦支穹顶计算模型修正

工程设计学报

2009, Vol. 16

Issue (4): 297-302

工程设计理论、方法与技术

基于实测数据的弦支穹顶计算模型修正

郭佳民^1，2, 袁行飞¹, 董石麟¹, 赵晓旭¹

1.浙江大学空间结构研究中心,浙江杭州 310027；2.中建国际(深圳)设计顾问有限公司,上海 200235

Modification of calculation model of suspendome based on measured data

GUO Jia-Min^1,2, YUAN Xing-Fei¹, DONG Shi-Lin¹, ZHAO Xiao-Xu¹

1.Space Structures Research Center, Zhejiang University, Hangzhou 310027, China；
2.China Construction (Shenzhen) Design International, Shanghai 200235, China

全文: PDF(473 KB) HTML

摘要： 为了使有限元计算模型给出的分析结果与相应的实测结果有良好的相关性,确保计算结果能切实有效地预测结构实测结果,并指导实际结构建造的顺利进行,对一弦支穹顶结构的试验模型实测结果与有限元模型计算结果进行对比分析,发现了理论模型与实际结构之间的差异,识别出导致差异的主要原因,并提出了基于测试结果对计算模型进行修正的算法与理论．通过对一实际试验模型进行的修正计算表明,修正算法能够基于实测数据便捷地对模型进行修正．最后对修正计算模型和原始模型的计算结果与实际模型结构的测试结果进行了对比分析,结果表明,修正后的计算模型较原始模型计算结果与实际模型的实测结果更加吻合,修正模型能够更加准确地描述实际结构．

关键词： 模型修正; 弦支穹顶; 有限元模型; 试验模型

Abstract: To make the analysis result of finite element model have good correlation with the corresponding measured result and ensure that the calculated result can effectively predict measurement result to guide practical construction, a contrast analysis between measured results of experiment model and calculation results of finite element model of a suspendome was carried out. The difference between numerical model and actual structure was found, and key cause resulting in the difference was identified.Then a algorithm of modifying finite element model based on measured value was provided. Calculation results of the modified finite element model and that of initial finite element model were compared with the measured value of actual experiment structure respectively, and the results show that the former accords with measured value better, and the proposed model can describe actual structure more accurately．

Key words: model modification suspendome finite element model experiment model

出版日期: 2009-08-28

基金资助:

国家自然科学基金重点资助项目（50638050）；浙江大学展城建设集团现代施工技术中心资助项目

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	郭佳民
	袁行飞
	董石麟
	赵晓旭

引用本文:

郭佳民, 袁行飞, 董石麟, 赵晓旭. 基于实测数据的弦支穹顶计算模型修正[J]. 工程设计学报, 2009, 16(4): 297-302.

GUO Jia-Min, YUAN Xing-Fei, DONG Shi-Lin, ZHAO Xiao-Xu. Modification of calculation model of suspendome based on measured data[J]. Chinese Journal of Engineering Design, 2009, 16(4): 297-302.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/ 或 https://www.zjujournals.com/gcsjxb/CN/Y2009/V16/I4/297

[1]	曾琪, 宾光富, 李超, 陈立锋. 联轴器扭转刚度对潜油电泵细长串联轴系扭振特性的影响研究[J]. 工程设计学报, 2021, 28(1): 89-94.
[2]	马天政, 吕昊, 张义民. 一种基于Bayes方法的随机模型修正方法[J]. 工程设计学报, 2016, 23(3): 206-211.
[3]	梁云忠，乔玉鹏，金波，伍权，徐卫平. 毛刷电接触对的插拔力研究[J]. 工程设计学报, 2015, 22(3): 290-294.
[4]	陈继刚, 张国智, 林宇飞. 铝合金轮毂弯曲疲劳试验的有限元模型[J]. 工程设计学报, 2011, 18(2): 120-123.
[5]	罗明军，王文林. 双扭杆双横臂独立悬架结构件有限元分析与关联式结构优化[J]. 工程设计学报, 2009, 16(2): 108-111.

Viewed

Full text

Abstract

Cited

Shared

Discussed