Please wait a minute...
工程设计学报
工程设计学报  2006, Vol. 13 Issue (1): 58-61    
工程设计理论、方法与技术     
大型钢坯修磨机恒力加载系统的研究
 王永进1, 权龙2, 杨付生3
1.太原理工大学 机械工程学院， 山西 太原 030024;2.太原理工大学 机电工程研究所， 山西 太原030024;
3.太原恒山机械厂， 山西 太原 030003
Research on characteristics of loading system with constant force of large scale grinding machine
 WANG  Yong-Jin1, QUAN  Long2, YANG  Fu-Sheng3
1.College of Mechanical Engineering,Taiyuan University of Technology,Taiyuan 030024, China;2. Institute of Mechatronic Engineering, Taiyuan University of Technology,Taiyuan 030024, China；3.Taiyuan Hengshan Machinery Plant, Taiyuan 030003, China
 全文: PDF(148 KB)   HTML
摘要： 在钢坯修磨机砂轮加载机构受力分析的基础上，对修磨机结构进行了优化。针对目前采用比例溢流阀和伺服阀加载存在的不足，提出在钢坯修磨机上采用比例三通减压阀加载。通过仿真研究及实际应用表明，在修磨机上采用这种电液比例加载系统可取得较好的修磨效果。
关键词： 钢坯修磨;  恒力磨削电液比例系统三通比例减压阀    
Abstract: On the basis of force analysis on grinding wheel loading mechanism, structural optimization of grinding machine is carried out. Aiming at the disadvantages of present loading system applying proportional relief valve or servo valve, loading system with 3-way proportional pressure reducing valve is proposed.By simulation and practical application, it can be concluded that taking this means can acquire better grinding effects.
Key words:  steel grinding    constant force grinding    electro-hydraulic proportional system    three-way proportional pressure reducing valve
出版日期: 2006-02-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
王永进
权龙
杨付生

引用本文:

王永进, 权龙, 杨付生. 大型钢坯修磨机恒力加载系统的研究[J]. 工程设计学报, 2006, 13(1): 58-61.

WANG Yong-Jin, QUAN Long, YANG Fu-Sheng. Research on characteristics of loading system with constant force of large scale grinding machine[J]. Chinese Journal of Engineering Design, 2006, 13(1): 58-61.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2006/V13/I1/58

No related articles found!