Please wait a minute...
工程设计学报
工程设计学报  2007, Vol. 14 Issue (2): 130-133    
工程设计理论、方法与技术     
Creator在堆取料机三维建模中的关键技术与应用
陈作炳，沈梦娇，孙亚忠
武汉理工大学 机电工程学院， 湖北 武汉 430070
Key technology and application of Creator in 3D modeling of staker-reclaimer
CHEN  Zuo-Bing,SHEN  Meng-Jiao,SUN  Ya-Zhong
School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan 430070, China
 全文: PDF(301 KB)   HTML
摘要： 在堆取料机视景系统的开发中，场景模型的建立和管理直接影响到整个系统的沉浸感、交互性和实时性。主要使用MultiGen Creator，从减小文件大小和提高渲染速度这两个方面对堆取料机的三维模型进行简化和管理，并对其中的关键技术如层次树、自由度和外部引用等进行探讨。这些技术已在系统开发中获得成功应用，取得了较好的仿真效果。
关键词： MultiGen Creator;  堆取料机;  模型简化    
Abstract: In the development of visual system in staker-reclaimer, establishment and management of scene modeling will directly influence the performances in immersion, interaction and real time of the whole system. Mainly utilizing MultiGen Creator, simplification and management of staker-reclaimer’s 3D model are carried out from the two perspectives of decreasing files’ sizes and increasing rendering speed. Moreover, some key technologies such as hierarchy, degree of freedom and external reference are discussed too. These technologies have been successfully applied in system development and achieved good simulation effect.
Key words: MultiGen Creator    staker-reclaimer    model simplification
出版日期: 2007-04-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

陈作炳，沈梦娇，孙亚忠. Creator在堆取料机三维建模中的关键技术与应用[J]. 工程设计学报, 2007, 14(2): 130-133.

CHEN Zuo-Bing,SHEN Meng-Jiao,SUN Ya-Zhong. Key technology and application of Creator in 3D modeling of staker-reclaimer[J]. Chinese Journal of Engineering Design, 2007, 14(2): 130-133.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2007/V14/I2/130

[1] 刘舜尧, 李进, 贺浩. 基于渐进结构优化的取料梁腹板拓扑优化[J]. 工程设计学报, 2011, 18(3): 174-177.