Please wait a minute...
工程设计学报  2012, Vol. 19 Issue (1): 57-60    
机电一体化和智能化系统设计理论、方法与技术     
基于BP神经网络的吸运风机故障诊断
 郝志勇, 刘 伟, 夏 玮, 闫 闯
辽宁工程技术大学 机械工程学院, 辽宁 阜新 123000
Fault diagnosis of the fan with air suction based on BP neural network
 HAO  Zhi-Yong, LIU  Wei, XIA  Wei, YAN  Chuang
School of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China
 全文: PDF(2969 KB)   HTML
摘要: 吸运风机是农业现代化生产机械联合收割机的重要组成设备.针对目前吸运风机经常出现的故障,收集了吸运风机故障征兆和其对应的故障类型.将故障样本数据和模糊神经网络相结合,并根据BP神经网络确定网络的输入和输出向量,对风机进行故障诊断,诊断结果与实际情况比较吻合.运用MATLAB实现神经网络故障诊断仿真,仿真结果表明诊断误差较小,输出向量与实际故障矩阵结果接近.
关键词: 风机人工神经网络BP算法故障诊断    
Abstract: The air suction fan is an important component device of agricultural modern production equipment. Aiming at the faults occurring currently in the fan, the fan fault symptoms and corresponding fault type were collected. Combined fault sample data and fuzzy neural network, confirmed input and output vector of network according to the BP neural network and diagnosed the fault of fan. The diagnosis is consistent with the reality. Use MATLAB to simulate neural network fault diagnosis and the simulation results show that the diagnosis error is small, output vector and the actual fault matrix results are approximate.
Key words:  fan    artificial neural network    BP algorithm    fault diagnosis
出版日期: 2012-02-15
基金资助:

国家自然科学基金资助项目(59774033);辽宁省教育厅创新团队项目(2008T068)

服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
郝志勇
刘伟
夏玮
闫闯

引用本文:

郝志勇, 刘伟, 夏玮, 闫闯. 基于BP神经网络的吸运风机故障诊断[J]. 工程设计学报, 2012, 19(1): 57-60.

HAO Zhi-Yong, LIU Wei, XIA Wei, YAN Chuang. Fault diagnosis of the fan with air suction based on BP neural network. Chinese Journal of Engineering Design, 2012, 19(1): 57-60.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2012/V19/I1/57

[1] 刘永江, 彭宣霖, 唐雄辉, 李华, 齐紫梅. 轴流散热风机共振失效分析与优化设计[J]. 工程设计学报, 2021, 28(2): 203-209.
[2] 刘春青, 王文汉. 基于人工神经网络-遗传算法的展成法球面精密磨削参数优化[J]. 工程设计学报, 2019, 26(4): 395-402.
[3] 李玲玲, 景丽婷, 马东娟, 李志刚. 改进证据理论及其在电力系统故障诊断中的应用[J]. 工程设计学报, 2012, 19(6): 485-488.
[4] 史俊友, 苏传生, 翟红岩. 不规则零件优化排样的神经网络混合优化算法[J]. 工程设计学报, 2009, 16(4): 271-275.
[5] 袁曾燕, 芮延年, 赵葵, 陈欢. 基于压电理论的悬索桥工作状况智能监测与诊断方法[J]. 工程设计学报, 2007, 14(6): 453-456.
[6] 窦毅芳, 刘飞, 张为华. 响应面建模方法的比较分析[J]. 工程设计学报, 2007, 14(5): 359-363.
[7] 丁俊健,谈士力,宋晓峰,孙亚杰. 基于BP神经网络的ETO产品配置设计方法[J]. 工程设计学报, 2007, 14(3): 199-203.
[8] 胡吉士, 杨毅. 洁净手术室用空调机组的构成[J]. 工程设计学报, 2003, 10(4): 238-241.