Please wait a minute...
工程设计学报
工程设计学报  2010, Vol. 17 Issue (6): 430-434    
工程设计理论、方法与技术     
基于SLP和Em-plant的变速器装配线规划研究
 肖 超1，2, 陈书宏2
1.中国科学院 研究生院, 北京 100049；2.中国科学院 沈阳自动化研究所, 辽宁 沈阳 110016
Transmission assembly planning study based on SLP and Em-plant
 XIAO Chao1，2, CHEN  Shu-Hong2
1. Graduate School of the Chinese Academy of Sciences, Beijing 100049, China; 2. Shenyang Institute of Automation, Chinese Academy of Sciences, Shenyang 110016, China
 全文: PDF(1427 KB)   HTML
摘要： 以汽车变速器装配线为研究对象,用SLP理论和Em-plant仿真相结合的方法进行变速器装配线规划,以缩短设计周期,提高设计质量.以长城汽车变速器装配线的设计规划过程为例,首先用SLP理论对装配线的主线体以及外围物流通道进行规划,然后用Em-plant仿真软件对规划的线体进行仿真验证,进一步平衡各工位.结果显示装配线的线体布置和物流通道合理,工位之间的平衡性高.由此可以得出,用SLP理论和Em-plant仿真相结合的方法进行变速器装备线的设计规划,条理性强,能够兼顾线体物流和平衡性两方面的要求,能够提高我国变速器装配线的设计水平.
关键词： SLP规划;  Em-plant仿真;  变速器;  装配线    
Abstract:  Automotive transmission assembly line was the object of study. The purpose was to illustrate that the use of SLP theory and Em-plant simulation in transmission assembly line planning could short the design cycle, improve the design quality. SLP theory and Em-plant simulation software were simply described, and then the relationship between them in product line planning and design process was analyzed. The authors took Great Wall automotive transmission assembly line as a design example to elaborate the design process of SLP theory and Em-plant simulation. Firstly the authors introduced the design process of the main assembly line layout and external logistics channel physical planning with SLP theory. And then the authors used the Em-plant simulation software to test and verify the planning assembly line, through which the authors could further balance the stations. The results showed that the assembly line layout and logistics channels are reasonable, and the balance between the stations is high. The conclusion is that the combination of SLP theory and Em-0plant simulation software in automotive transmission assembly line layout design is reasonable. It could satisfy the requirements of the logistics and the balance of the assembly line. And this can effectively improve the level of our production line design．
Key words: SLP planning    Em-plant simulation    transmission    assembly line
出版日期: 2010-12-28
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
肖 超
陈书宏

引用本文:

肖 超, 陈书宏. 基于SLP和Em-plant的变速器装配线规划研究[J]. 工程设计学报, 2010, 17(6): 430-434.

XIAO Chao, CHEN Shu-Hong. Transmission assembly planning study based on SLP and Em-plant[J]. Chinese Journal of Engineering Design, 2010, 17(6): 430-434.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2010/V17/I6/430

[1] 贾纪鹏,臧立彬,陈勇,林霄喆,陈杰,武一民. 支承刚度及齿面涂层对斜齿轮副啮合特性的影响研究[J]. 工程设计学报, 2023, 30(1): 48-56.
[2] 张泽, 陈勇, 李光鑫, 雷勇敢, 阮鸥, 王再宙. 电动汽车变速器电液控制系统总成设计及结构优化[J]. 工程设计学报, 2021, 28(3): 335-343.
[3] 王哲, 陈勇, 曹展, 李光鑫, 左扣成. 纯电动汽车两挡变速器减振降噪研究[J]. 工程设计学报, 2019, 26(3): 280-286.
[4] 周晋超，刘子建，皮皓杰，刘子云. 基于发动机转矩与转速控制的AMT换挡策略研究[J]. 工程设计学报, 2015, 22(2): 185-192.
[5] 朱茂桃，沈登峰，梁艳春，汪东坪，张彤. 混联式混合动力变速器液压系统控制策略设计[J]. 工程设计学报, 2014, 21(5): 469-475.
[6] 黄秋波, 岳 杰, 徐维胜. 一种液压机械无级变速器的性能及动平衡分析[J]. 工程设计学报, 2006, 13(6): 396-399.
[7] 孙伟, 韩清凯, 于涛, 闻邦椿. 汽车变速器装配线的可视化仿真系统研究[J]. 工程设计学报, 2006, 13(4): 245-248.