Please wait a minute...
工程设计学报  2016, Vol. 23 Issue (1): 28-34    DOI: 10.3785/j.issn.1006-754X.2016.01.005
工业设计     
数字化人机界面的多目标意象设计决策研究
赵慧亮, 何林, 林丽
贵州大学 机械工程学院, 贵州 贵阳 550025
The decision making on multi-image design for digital human-machine interface
ZHAO Hui-liang, HE Lin, LIN Li
School of Mechanical Engineering, Guizhou University, Guiyang 550025, China
 全文: PDF(959 KB)   HTML
摘要: 用户的感性需求愈来愈受到设计者和企业的重视.为解决实际中多目标意象要求下数字化人机界面方案选择过程中存在的复杂性与主观性问题,提出一种三角模糊数与逼近理想解排序法相结合的模糊逼近理想解排序法(F-TOPSIS).结合某新型远程操控清障车的数字化人机界面设计,在通过运用因子分析方法获取用户对数字化人机界面典型样本的4类感性意象的基础上,应用F-TOPSIS实现了决策者多目标意象特定要求下对10个数字化人机界面设计方案的优先级排序,验证了该方法的可行性.研究表明F-TOPSIS对数字化人机界面设计方案的区分度较好,能在多目标意象需求下进行较为合理、准确的设计决策.
关键词: 数字化人机界面多目标意象模糊逼近理想点排序设计决策    
Abstract: Increasing designers and companies are paying attention to users' perceptual demand. Aiming at the existing complexity and the subjectivity in the process of digital man-machine interface scheme decision under the requirements of specific multi-image effectively,fuzzy technique for order preference by similarity to an ideal solution (F-TOPSIS) was proposed which integrated triangular fuzzy number and technique for order preference by similarity. Combined with a new type remote control wrecker's digital human-machine interface (DHMI) design, and along with four kinds of perceptual image confirmed by using the factor analysis from the typical HDMI samples, it was applied to achieve the plan prioritization under the decision maker's specific requirements of multi-image for 10 digital man-machine interface conceptual design scheme, and its feasibility and validity were proved. Studies indicated that F-TOPSIS had good performance in the differentiation for the DHMI design scheme, and helped to make decision with specific multi-image requirements reasonably and accurately.
Key words: digital human-machine interface    multi-image    F-TOPSIS    decision making
收稿日期: 2015-10-05 出版日期: 2016-02-28
CLC:  TP391  
基金资助:

国家自然科学基金资助项目(51465007).

通讯作者: 何林(1965-),男,四川盐亭人,教授,博士生导师,从事先进加工技术及装备研究,E-mail:helin6568@163.com.     E-mail: helin6568@163.com
作者简介: 赵慧亮(1988-),男,河北邢台人,博士生,从事工业设计、现代设计方法研究,E-mail:fightingzhl@163.com.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

赵慧亮, 何林, 林丽. 数字化人机界面的多目标意象设计决策研究[J]. 工程设计学报, 2016, 23(1): 28-34.

ZHAO Hui-liang, HE Lin, LIN Li. The decision making on multi-image design for digital human-machine interface. Chinese Journal of Engineering Design, 2016, 23(1): 28-34.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2016.01.005        https://www.zjujournals.com/gcsjxb/CN/Y2016/V23/I1/28

[1] 罗仕鉴,潘云鹤.产品设计中的感性意象理论、技术与应用研究进展[J].机械工程学报,2007,43(3):8-13. LUO Shi-jian,PAN Yun-he.Review of theory,key technologies and its application of perceptual image in product design[J].Chinese Journal of Mechanical Engineering,2007,43(3):8-13.

[2] NAGAMACHI M.Kansei engineering:a new ergonomic consumer-oriented technology for product development[J].International Journal of Industrial Ergonomics,1995,15(1):3-11.

[3] 苏建宁,张秦玮,吴江华,等.产品多意象造型进化设计[J].计算机集成制造系统,2014,11(11):2675-2682. SU Jian-ning,ZHANG Qin-wei,WU Jiang-hua,et al.Evolutionary design of product multi-image styling[J].Computer Integrated Manufacturing Systems,2014,11(11):2675-2682.

[4] FUNG K,KWONG C,SIU K W,et al.A multi-objective genetic algorithm approach to rule mining for affective product design[J].Expert Systems with Applications,2012,39(8):7411-7419.

[5] YANG C C.Constructing a hybrid kansei engineering system based on multiple affective responses:application to product form design[J].Computers & Industrial Engineering,2011,60(4):760-768.

[6] JIANG H,KWONG C,LIU Y,et al.A methodology of integrating affective design with defining engineering specifications for product design[J].International Journal of Production Research,2015,53(8):2472-2488.

[7] 孙志学.基于灰色关联分析的产品色彩方案多意象优选[J].机械设计,2015,32(1):120-122. SUN Zhi-xue.Multiple image selection of product color schemes based on grey relational analysis[J].Journal of Machine Design,2015,32(1):120-122.

[8] 李永锋,朱丽萍.基于模糊层次分析法的产品配色设计[J].机械科学与技术,2012,31(12):2028-2033. LI Yong-feng,ZHU Li-ping.Product color design based on fuzzy analytic hierarchy process[J].Mechanical Science and Technology for Aerospace Engineering,2012,31(12):2028-2033.

[9] 张芳兰,杨明朗,刘卫东.基于模糊TOPSIS方法的汽车形态设计方案评价[J].计算机集成制造系统,2014,20(2):276-283. ZHANG Fang-lan,YANG Ming-lang,LIU Wei-dong.Evaluation of automobile form design based on fuzzy TOPSIS[J].Computer Integrated Manufacturing Systems,2014,20(2):276-283.

[10] 卢青波,张学良,温淑花,等.基于差异演化算法和多属性决策的机电系统可靠性多目标优化设计[J].工程设计学报,2011,18(6):412-417. LU Qing-bo,ZHANG Xue-liang,WEN Shu-hua,et al.Mechanical electronics system reliability multi-objective optimization design based on differential evolution algorithm and multiple attribute decision making[J].Chinese Journal of Engineering Design,2011,18(6):412-417.

[11] 巩在武.不确定模糊判断矩阵原理、方法与应用[M].北京:科学出版社,2011:37-60. GONG Zai-wu.Principle,method and application of uncertain fuzzy judgment matrix[M].Beijing:Science Press,2011:37-60.

[12] 夏勇其,吴祈宗.一种混合型多属性决策问题的TOPSIS方法[J].系统工程学报,2004,19(6):630-634. XIA Yong-qi,WU Qi-zong.A technique of order preference by similarity to ideal solution for hybrid multiple attribute decision making problems[J].Journal of Systems Engineering,2004,19(6):630-634.

[13] 周蕾,薛澄岐,汤文成,等.界面元素布局设计的美度评价方法[J].计算机辅助设计与图形学学报,2013,25(5):758-766. ZHOU Lei,XUE Cheng-qi,TANG Weng-cheng,et al.Aesthetic evaluation method of interface elements layout design [J].Journal of Computer Aided Design and Computer Graphics,2013,25(5):758-766.

[14] 袁培飒,陈锐,林涛,等.基于遗传算法和神经网络的软件界面美感建模[J].四川大学学报(自然科学版),2015,52(2):269-274. YUAN Pei-sa,CHEN Rui,LIN Tao,et al.A new software interface aesthetics model based on genetic algorithm and neural network[J].Journal of Sichuan University (Natural Science Edition),2015,52(2):269-274.

[15] 张娜,王家民,杨延璞.人机界面形态元素布局设计美度意象的评价方法[J].机械科学与技术,2015,34(10):1594-1598. ZHANG Na,WANG Jia-min,YANG Yan-pu.Evaluation method of aesthetic image for man-machine interface form elements layout design[J].Mechanical Science and Technology for Aerospace Engineering,2015,34(10):1594-1598.

[16] MENG D S,WANG J H,YANG C C.Affective response dimension selection for product design:a comparison of cluster analysis and Procrustes analysis[J].International Journal of Digital Content Technology & Its Applications,2011,5(1):305-318.

[17] SHANG H H,MING C C,CHANG C C.A semantic differential study of designers' and users' product form perception[J].International Journal of Industrial Ergonomics,2000,25(4):375-391.

[18] 林丽,阳明庆,张超,等.产品情感研究及情感测量的关键技术[J].图学学报,2013,34(1):122-127. LIN Li,YANG Ming-qing,ZHANG Chao,et al.The product emotion and key technologies for emotional measurement[J].Journal of Graphics,2013,34(1):122-127.
[1] 王碧海, 张健, 陈永亮, 彭庆金, 顾佩华. 盾构螺旋输送机适应性设计智能决策[J]. 工程设计学报, 2022, 29(1): 1-9.