Please wait a minute...
工程设计学报
工程设计学报  2010, Vol. 17 Issue (2): 98-101    
工程设计理论、方法与技术     
缝制设备协同开发过程中冲突消解方法的研究
 张 莉
Research on conflict resolution of sewing equipment collaborative development process
 ZHANG  Li
台州学院 机械工程学院,浙江 台州 318000
 全文: PDF(1137 KB)   HTML
摘要： School of Mechanical Engineering, Taizhou University, Taizhou 318000, China
关键词： 缝制设备;  冲突消解;  粗糙集;  相似性度量    
Abstract: To resolve the conflicts in sewing equipment development, and based on rough set, the conflict resolution algorithm was presented, and attribute importance was used as evaluating information to calculate the similarity in conflict resolution process. And then concrete implementation steps for the algorithm were described in detail. Finally, the conflict resolution system was developed, and the intelligent process of conflict resolution of sewing equipment product development can be carried out based on knowledge. With the platform, rapid design of sewing equipment is maintained efficiently．
Key words: sewing equipment    conflict resolution    rough set    similarity measure
出版日期: 2010-04-28
:  TH 122  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
张莉

引用本文:

张 莉. 缝制设备协同开发过程中冲突消解方法的研究[J]. 工程设计学报, 2010, 17(2): 98-101.

ZHANG Li. Research on conflict resolution of sewing equipment collaborative development process[J]. Chinese Journal of Engineering Design, 2010, 17(2): 98-101.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2010/V17/I2/98

[1] 魏巍, 林载盛. 基于RIR-MOO的定制产品优化设计方法研究[J]. 工程设计学报, 2020, 27(5): 592-599.
[2] 李松涛, 刘英, 冉琰, 柯磊, 陈辉. 基于元动作单元的数控机床故障分级决策方法[J]. 工程设计学报, 2018, 25(6): 630-638,710.
[3] 司光耀, 王凯, 李文强, 李彦, 牟亮. 基于大数据和粗糙集的产品需求分析方法研究[J]. 工程设计学报, 2016, 23(6): 521-529.
[4] 陈建宏, 周汉陵, 邬书良, 杨珊, 于凤玲. 优势变精度粗糙集构建采矿方案评价体系的研究[J]. 工程设计学报, 2013, 20(6): 453-458.