Please wait a minute...
工程设计学报
工程设计学报  2011, Vol. 18 Issue (5): 396-    
机电产品工程设计     
FR算法在3G射频功率放大器设计中的应用
朱二莉
苏州经贸职业技术学院 信息系,江苏 苏州 215009
The study of CFR algorithm for digital input power amplifier of 3G base station
ZHU Erli
Department of Information Technology, Suzhou Institute of Trade and Commerce, Suzhou 215009, China
 全文: PDF(1511 KB)   HTML
摘要： 针对如何提高3G基站中数字功率放大器的效率问题,提出了CFR算法的运用.分析了应用CFR模块后对功率放大器性能的影响,给出了系统框图.详细阐述了在CFR算法中通过对削峰后的误差信号进行滤波处理,将原始信号减去经过处理的误差信号,得到削峰后的信号,从而提高了功率放大器的效率.最后使用了MATLAB仿真演示了运用CFR模块前后的放大器性能参数的对比结果,证明应用CFR算法后,降低了峰均比，减小了CCDF,验证了方法的有效性.
关键词： 功率放大器;  波峰因子消减;  互补积累分布函数;  误差向量幅度    
Abstract: Considering efficiency improvement of digital power amplifier in the current 3G base stations, the application of CFR algorithm module was proposed. The effect of the application of CFR algorithm module on performance of digital power amplifier was analyzed, and block diagram of system was showed. The whole process of improving efficiency of power amplifier by filtering error signal after clipped, and getting clipped signal by subtracting error signal from original signal was described in detail. Finally, the comparison between performance parameters of MATLAB simulation results before and after CFR algorithm application are given, which indicates PAR and CCDF decrease after CFR is applied, and the method is practically validated．
Key words: power amplifier    crest factor reduction    complementary cumulative distribution function    error vector magnitude
出版日期: 2011-10-28
:  TN 91  
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
朱二莉

引用本文:

朱二莉. FR算法在3G射频功率放大器设计中的应用[J]. 工程设计学报, 2011, 18(5): 396-.

ZHU ER Li. The study of CFR algorithm for digital input power amplifier of 3G base station[J]. Chinese Journal of Engineering Design, 2011, 18(5): 396-.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/    或    https://www.zjujournals.com/gcsjxb/CN/Y2011/V18/I5/396

[1] 南敬昌, 张鹏俊. 平衡式E/F类功率放大器的设计与实现[J]. 工程设计学报, 2018, 25(2): 237-244.
[2] 李咏乐，南敬昌，游长江，杜学坤，蒋 迪. 基于改进型匹配网络的宽带高效率E类功放的设计[J]. 工程设计学报, 2015, 22(2): 178-184.