聚二甲基硅氧烷原位固化3D打印装置及工艺
|
|
苏炼,封森文,谢英睿,栾丛丛,姚鑫骅
|
In-situ curing polydimethylsiloxane 3D printer and process
|
|
Lian SU,Senwen FENG,Yingrui XIE,Congcong LUAN,Xinhua YAO
|
|
| 表 3 工艺参数优化正交试验表 |
| Tab.3 Orthogonal experiment table for process parameter optimization |
|
| 试验号 | 试验因素 | 打印温度
A/℃ | 喷嘴气压
B/kPa | 打印速度
C/(mm·min−1) | 打印层高
D/mm | | 1 | 1(180) | 1(50) | 1(50) | 1(0.2) | | 2 | 1(180) | 2(100) | 3(150) | 4(0.5) | | 3 | 1(180) | 3(150) | 5(250) | 2(0.3) | | 4 | 1(180) | 4(200) | 2(100) | 5(0.6) | | 5 | 1(180) | 5(250) | 4(200) | 3(0.4) | | 6 | 2(200) | 1(50) | 5(250) | 4(0.5) | | 7 | 2(200) | 2(100) | 2(100) | 2(0.3) | | 8 | 2(200) | 3(150) | 4(200) | 5(0.6) | | 9 | 2(200) | 4(200) | 1(50) | 3(0.4) | | 10 | 2(200) | 5(250) | 3(150) | 1(0.2) | | 11 | 3(220) | 1(50) | 4(200) | 2(0.3) | | 12 | 3(220) | 2(100) | 1(50) | 5(0.6) | | 13 | 3(220) | 3(150) | 3(150) | 3(0.4) | | 14 | 3(220) | 4(200) | 5(250) | 1(0.2) | | 15 | 3(220) | 5(250) | 2(100) | 4(0.5) | | 16 | 4(240) | 1(50) | 3(150) | 5(0.6) | | 17 | 4(240) | 2(100) | 5(250) | 3(0.4) | | 18 | 4(240) | 3(150) | 2(100) | 1(0.2) | | 19 | 4(240) | 4(200) | 4(200) | 4(0.5) | | 20 | 4(240) | 5(250) | 1(50) | 2(0.3) | | 21 | 5(260) | 1(50) | 2(100) | 3(0.4) | | 22 | 5(260) | 2(100) | 4(200) | 1(0.2) | | 23 | 5(260) | 3(150) | 1(50) | 4(0.5) | | 24 | 5(260) | 4(200) | 3(150) | 2(0.3) | | 25 | 5(260) | 5(250) | 5(250) | 5(0.6) |
|
|
|