适用于机器换刀的一体式刀座结构的承载性能
|
|
夏毅敏,郎宇杭,暨智勇,任勇
|
Βearing performance of integrated cutter holder structure suitable for robot cutter change
|
|
Yi-min XIA,Yu-hang LANG,Zhi-yong JI,Yong REN
|
|
| 表 1 刀座系统参数水平表 |
| Tab.1 Parameter level table of cutter holder system |
|
| 参数名称 | 符号 | 水平 | | 1 | 2 | 3 | 4 | 5 | | 1)注：括号内的值为原始模型初始值 | | 转动块轴间距/mm | P1 | 155.0 | 160.0 | (165.0)1) | 170.0 | 175.0 | | 转动块偏转角/(°) | P2 | 30.4 | 32.4 | (34.4) | 36.4 | 38.4 | | 转动块长度/mm | P3 | 125.0 | 135.0 | (145.0) | 155.0 | 165.0 | | 转动块头部厚度/mm | P4 | 30.0 | 35.0 | (40.0) | 45.0 | 50.0 | | 转动块槽宽/mm | P5 | 20.0 | 25.0 | (30.0) | 35.0 | 40.0 | | 转动块宽度/mm | P6 | 102.50 | 103.75 | (105.00) | 106.25 | 107.50 | 转动块底部
圆角半径/mm | P7 | 10.0 | 15.0 | 20.0 | (25.0) | 30.0 | 转动块颈部
圆角半径/mm | P8 | (20.0) | 30.0 | 40.0 | 50.0 | 60.0 | 刀轴与转动块转轴
竖直距离/mm | P9 | 97.5 | (107.5) | 117.5 | 127.5 | 137.5 | | 刀箱高度/mm | P10 | 315.0 | 325.0 | (335.0) | 345.0 | 355.0 |
|
|
|