铝硅合金实体关系抽取数据集的构建方法
刘英莉,吴瑞刚,么长慧,沈韬

Construction method of extraction dataset of Al-Si alloy entity relationship
Ying-li LIU,Rui-gang WU,Chang-hui YAO,Tao SHEN
表 6 铝硅合金关系抽取数据集的实体类型示例
Tab.6 Example of entity type for Al-Si alloy relational extraction dataset
实体类型 示例
含量 However, 3% Mn addition leads to a substantial improvement of the tensile strengths at elevated temperature.
元素 However, 3% Mn addition leads to a substantial improvement of the tensile strengths at elevated temperature.
合金 In this paper, Al-20Si-3Cu-1Mg alloy was prepared by spray deposition technique.
实验 In this paper, Al-20Si-3Cu-1Mg alloy was prepared by spray deposition technique.
实验结果 Cylindrical samples of 25 mm in diameter and 50 mm in length were machined out from each spray deposit obtained.
测试名 Fig.1(c) shows the scanning electron microscopy microstructure of the spray-deposited A2 alloy.
测试值 From table 2, with additions of 5% Fe to Al-20Si-3Cu-1Mg alloy, both the yield and ultimate tensile strengths was increased 55 and 64 MPa at room temperature.
测试图 Fig.1(c) shows the scanning electron microscopy microstructure of the spray-deposited A2 alloy.
The formation of b-Al5FeSi phase in this transformation is known to be very slow.
参数名 The testing temperatures were 298, 473 and 573 K.
参数值 The testing temperatures were 298, 473 and 573 K.