Please wait a minute...
J4  2013, Vol. 47 Issue (5): 790-795    DOI: 10.3785/j.issn.1008-973X.2013.05.008
    
Development of in-out-burst pneumatic on/off valve 
LIU Qiong, TAO Guo-liang, ZHONG Wei, BAN Wei
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China     
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A high-speed on/off valve with large flow rate, employing a pilot high-speed on/off solenoid valve to actuate a large diameter main valve, was developed for measuring the liquid level in a well. A new method which used the pressure variation characteristic in the control chamber during the charging-discharging processes to de- cribe the dynamic characteristics of the valve was proposed. A detailed mathematical model based on the therm- odynamics, kinetics,pneumatic transmission and some other theories was established. A experimental system was built up to verify the simulation result. Some factors having influences on the dynamic characteristics of the valve, such as the orifice diameter and the control chamber volume, were analyzed and optimized. The agreeme-nt between the experimental data and the simulation results verified the effectiveness of the mathematical models and the experimental system. Results also shows that increasing the control chamber volume would reduce the vibration amplitude, but the opening time of the valve would be prolonged. When the diameter ratio of the orific- e and the pilot valve is within the range of 0.13 ~ 0.27, the valve performs good response characteristics. The  valve developed solves the contradiction of high speed and large flow rate.



Published: 01 May 2013
CLC:  TH 138.523  
Cite this article:

LIU Qiong, TAO Guo-liang, ZHONG Wei, BAN Wei. Development of in-out-burst pneumatic on/off valve . J4, 2013, 47(5): 790-795.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2013.05.008     OR     http://www.zjujournals.com/eng/Y2013/V47/I5/790


内外爆气动开关阀

为了设计一种用于油井液位测量系统的气动高速大流量开关阀,利用小流量的先导高速开关阀驱动大通径的主阀芯.提出以控制腔的充放气过程中压力特性来描述该阀的动态特性.基于热力学、动力学、气压传动等理论详细建立数学模型,并搭建内外爆气动开关阀的实验平台来验证模型的正确性.对阻尼孔通径、控制腔体积等影响动态特性的因素进行分析和优化.结果表明,仿真与实验相符.增大控制腔体积可减小压力振幅幅度,但阀芯开启时间变长;而阻尼孔通径与先导阀通径的比值在0.13~0.27内系统的响应特性颇好.实验结果表明,该阀有效解决大流量与高切换速度之间的矛盾.

[1] 李峰,刘习文.油井液位仪的设计与实现\
[J\]. 声学与电子工程.2009,3:40-45.
LI Feng,LIU Xi-wen.Design and study on oil level gauge [J] .Acoustics and electronics engineering,2009,3:40-45.
[2] PASSARINI L C, NAKAJIMA P R. Development of a high-speed solenoid valve an investigation of the importance of armature mass on the dynamic response [J]. Journal of the Brazilian Society Of Mechanical Sciences and Engineering, 2003, XXV(4):329-335.
[3] XIANG Z, LIU H,TAO G L, et al. Development of an ε-type actuator for enhancing high-speed electro pneumatic ejector valve performance [J]. Journal of Zhejiang University Science A, 2008,9(11):1552-1559.
[4] SMC Inc.Introduction on the new product of SMC [EB/OL].\
[2011-07-20\]. http: ∥ www.smcworld.com / 2002 / npp / pdf / jp/npp-e06-13.pdf.
[5] Macvalves Inc.31 series inline valve [EB/OL].\
[2011-07-20\].http: // macvalves . com / Portals / 97890 /docs /31catalog.pdf.
[6] CKD Inc. High frequency 2 port valve for compressed air [EB/OL].\
[2011-07-20\] . http: ∥ www . ckd . co. jp / English / kiki /info /gene _val/pd.html.
[7]TOPCU E,YUKSEL,KAMIS Z. Development of electro -pneumatic fast switching valve and investigation of its characteristics [J]. Mechanics, 2006, 16(6):365-378.
[8] BURROWS C R,WEBB C R.Simulation of an on-off pneumatic servomechanism [J].Proceedings of the Institution of Mechanical Engineers,1968,182:631-642.
[9] BLAGOJEVI V, STOJILJKOVI M. Mathematical and simulink model of the pneumatic system with bridging of the dual action cylinder chambers [J] .Facta Universitatis-Series::Mechanical Engineering,2007,5(1):23-31.
[10] RICHER E, HURMUZLU Y.A high performance pneumatic force actuator system: Part Ⅰ—nonlinear mathematical model [J]. Journal of Dynamic Systems, Measurement, and Control, 2000, 122(3): 416-425.
[11] XIANG Z,LIU H,TAO G L.Model and optimal design of pneumatic high-speed on/off valve [C]∥Proceedings of the 7th International Conference on Fluid Power Transmission and Control (ICFP),Portugal: [s. n.] .2009,533-536.
[12] KAJIMA T,KAWAMURA Y.Development of a high-speed solenoid valve: investigation of solenoids [J].IEEE Transactions on Industrial Electronics,1995,42(1):18.
[13] ITUM , ILI T, ESSERT M. High speed solenoid valves in pneumatic servo applications[C]∥Proceedings of the 15th Mediterranean Conference on Control & Automation,Portugal: [s. n.].2007, T6001.
[14] VIKTOR S, JANOS V. Computational and experimental investigation on solenoid valve dynamics [C]∥2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics Proceedings. Como:IEEE,2001,1:618-623.
[15] 路甬祥. 液压气动技术手册[M]. 北京:机械工业出版社,2002.
[16] AL-IBRAHIM A M, OTIS D R.Transient air temperature and pressure measurements during the charging and discharging processes of actuating pneumatic cylinder [J]. Proceedings of the 45th National Conference on Fluid Power.1992:N92161.
[17] BENDOV D, SALCUDEAN A. Force Controlled Pneumatic Actuator [J] .IEEE Transactions on Rob Automatics,1995, 6(11) :906-911.
[18] CARNEIRO J F, ALMEIDA F G. Heat transfer evaluation of industrial pneumatic cylinders [C]∥Proceeding of the Institution of Mechanical Engineers, Part I:J. Systems and Control Engineering.2007,221 (1) :119-128.
[19] BEATER P. Pneumatic drives: system design, modeling and control [M]. Berlin Heidelberg: Springer-Verlag,2007.

[1] BAN Wei, TAO Guo-liang, LU Bo, MENG De-yuan, YUAN Yue-feng. Modeling and characteristics investigation on a new pneumatic
proportional pressure valve
[J]. J4, 2012, 46(11): 1953-1959.