Please wait a minute...
浙江大学学报(工学版)
土木与交通工程     
基于实际换挡规律的卡车列队行驶起步控制
李明达,隗海林,门玉琢,包翠竹
1.吉林大学 交通学院,吉林 长春 130022;2.长春工程学院 机电工程学院,吉林 长春 130012
Starting control of platooning trucks based on actual gearshift schedule
LI Ming da,KUI Hai lin,MEN Yu zhuo,BAO Cui zhu
1. College of Transportation, Jilin University, Changchun 130022, China;
2. School of Mechatronics Engineering, Changchun Institute of Technology, Changchun 130012, China
 全文: PDF(1250 KB)   HTML
摘要:

为了解决卡车列队行驶起步过程中的控制问题,在车辆行驶35 万公里的实验数据中提取456 段起步过程的挡位数据,对该数据中各挡位的使用情况进行统计与分析.根据统计结果制定相应的换挡规则,利用自适应模糊控制算法设计车辆列队行驶的控制模型,在模型中通过跟随车辆的挡位信息对模糊控制器的输入量进行加权系数调整,提高控制算法的自适应性,通过TruckSim和Matlab的联合仿真,将实车实验数据作为头车模拟工况,模拟3辆卡车在车联网环境下的列队起步过程,仿真结果表明起步过程中的行驶间距误差可以控制在车辆单位时间内行驶距离的5%以内,具有一定的控制精度.

Abstract:

456 segments gear status data in the start process were extracted from the experiment vehicle traveling 35,000 kilometers in order to solve the starting control problem of platooning trucks.The corresponding gearshift rule was developed with the statistics and analysis.The control model of vehicle platoon was established by using adaptive fuzzy control algorithm. The weight coefficients were decided through the gear status information of the following vehicle. They were used to adjust the input scale of fuzzy controller in order to improve the adaptability of control algorithm. Through cosimulation of TruckSim and Matlab, three trucks platoon was simulated in the case of vehiclevehicle communication environment using the test data from real vehicle as the simulation conditions of the leader truck. The simulation results show that the travel space error between two vehicles can be controlled within 5 percent of driving distance in unit time. The control model has certain control accuracy.

出版日期: 2017-01-14
:     
基金资助:

国家自然科学基金资助项目(51378075).

通讯作者: 隗海林,男,教授,博导.ORCID :0000000213650980.     E-mail: khl69@163.com
作者简介: 李明达(1982-),男,博士生,讲师,从事车路协同节能技术等研究.ORCID : 0000000211279305.E-mail:limingda_123@qq.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

李明达,隗海林,门玉琢,包翠竹. 基于实际换挡规律的卡车列队行驶起步控制[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008973X.2016.05.011.

LI Ming da,KUI Hai lin,MEN Yu zhuo,BAO Cui zhu. Starting control of platooning trucks based on actual gearshift schedule. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008973X.2016.05.011.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2016.05.011        http://www.zjujournals.com/eng/CN/Y2016/V50/I5/887

[1] 中华人民共和国国家统计局. 2014年国民经济和社会发展统计公报 [EB/OL]. (20150226) [20150927]. http:∥www.stats.gov.cn/tjsj/zxfb/201502/t20150226_685799.html.
[2] 中华人民共和国交通运输部. 2014年交通运输行业发展统计公报 [EB/OL]. (20150723) [20150927]. http:∥www.mot.gov.cn/zhuzhan/jiaotonggaikuang/201507/t20150723_1853384.html.
[3] NIEUWENHUIJZE M R I, KEULEN T V,NC S, et al. Cooperative driving with a heavyduty truck in mixed traffic: experimental results [J]. Transactions on Intelligent Transportation Systems, 2012, 13(3): 1026-1032.
[4] TSUGAWA S, KATO S, AOKI K. An automated truck platoon for energy saving [C]∥ Intelligent Robots and Systems. San Francisco, USA: [s. n.],2011:410-411.
[5] FRANKE U, BTTIGER F, et al. Truck platooning in mixed traffic [C]∥ Proc. of the Intelligent Vehicle Symposium. Detroit, USA: [s. n.] ,1995:16.
[6] GEHRIG S K, STEIN F J. Collision avoidance for vehiclefollowing systems [J]. Intelligent Transportation Systems, 20075(4):112-120.
[7] GEHRING O, FRITZ H. Practical results of a longitudinal control concept for truck platooning with vehicle to vehicle communication [C]∥ Intelligent Transportation System. Boston, USA: [s. n.] , 1997:117-122.
[8] VINEL A, LIN L , LYAMIN N. Vehicletovehicle communication in cacc/platooning scenarios [J] . Communications Magazine, 2015,53(8):192-197.
[9] TSUGAWA S, KATO S.Energy ITS: another application of vehicular communications [J]. Communications Magazine, 2010,48(11)120-126.
[10] 马育林,吴青,张蕊,等. 模拟自治车队行驶过程变工况速度跟踪控制[J]. 机械工程学报,2011,47(7):140-147.
MA Yulin, WU Qing, ZHANG Rui, et al. Speed tracking control for a simulated intelligent vehicle platoon under variable road conditions [J]. Journal of Mechanical Engineering, 2011,47(7):140-147.
[11] 高振海, 吴涛, 尤洋. 基于粒子群算法的汽车自适应巡航控制器设计[J]. 农业机械学报, 2013,44(12):11-16.
GAO Zhenhai, WU Tao, YOU Yang. Design of vehicle adaptive cruise controller based on PSO algorithm [J]. Transactions of the Chinese Society for Agricultural Machinery, 2013,44(12):11-16.
[12] 岳伟,郭戈. 自主车队的非线性建模与控制[J]. 控制与决策,2009,24(7):9961000.
YUE Wei, GUO Ge. Nonlinear modelling and control of autonomous platoon [J]. Control and Decision, 2009,24(7):9961000.
[13] 任殿波, 张策, 张继业.考虑前后信息的车辆跟随自适应控制[J]. 哈尔滨工业大学学报. 2011, 43(6):76-80.
REN Dianbo, ZHANG Ce, ZHANG Jiye. Vehicle following adaptive control using front and back information [J]. Journal of Harbin Institute of Technology, 2011,43(6):76-80.

[1] 董凯, 赖俊英, 钱晓倩, 詹树林, 阮方. 夏热冬冷地区居住建筑水平式外遮阳节能效果[J]. 浙江大学学报(工学版), 2016, 50(8): 1431-1437.
[2] 李佳琦, 范利武, 俞自涛. 超亲水表面在淬火冷却过程中的沸腾传热特性[J]. 浙江大学学报(工学版), 2016, 50(8): 1493-1498.
[3] 江衍铭, 张建全, 明焱. 集合神经网络的洪水预报[J]. 浙江大学学报(工学版), 2016, 50(8): 1471-1478.
[4] 钟崴, 彭梁, 周永刚, 徐剑, 从飞云. 基于小波包分析和支持向量机的锅炉结渣诊断[J]. 浙江大学学报(工学版), 2016, 50(8): 1499-1506.
[5] 夏玉峰, 任莉, 叶彩红, 王力. 基于RSM的立柱加强板定位布局多目标优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1600-1607.
[6] 李林玉, 吴张华, 余国瑶, 戴巍, 罗二仓. 直线压缩机电声转换特性的实验[J]. 浙江大学学报(工学版), 2016, 50(8): 1529-1536.
[7] 曲巍崴, 唐伟, 毕运波, 李少波, 罗水均. 避免强迫装配和提升效率的预连接工艺规划[J]. 浙江大学学报(工学版), 2016, 50(8): 1561-1569.
[8] 胡小东, 顾临怡, 张范蒙. 应用于数字变量马达的高速开关阀[J]. 浙江大学学报(工学版), 2016, 50(8): 1551-1560.
[9] 杨姝, 刘国平, 亓昌, 王大志. 金属空心球梯度泡沫结构抗冲击特性仿真与优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1593-1599.
[10] 杨章, 童根树, 张磊. 对称布置2根单侧加劲肋的有效刚度[J]. 浙江大学学报(工学版), 2016, 50(8): 1446-1455.
[11] 蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁抗火性能试验[J]. 浙江大学学报(工学版), 2016, 50(8): 1463-1470.
[12] 单华峰, 夏唐代, 俞峰, 胡军华, 潘金龙. 地下增层开挖托换桩的屈曲稳定临界荷载分析[J]. 浙江大学学报(工学版), 2016, 50(8): 1425-1430.
[13] 辜天来,张帅,郑耀. 咽式进气道/等直隔离段的反压特性[J]. 浙江大学学报(工学版), 2016, 50(7): 1418-1424.
[14] 程时伟, 陆煜华, 蔡红刚. 移动设备眼动跟踪技术[J]. 浙江大学学报(工学版), 2016, 50(6): 1160-1166.
[15] 黄家辉, 冯冬芹. 广义收益信息物理系统脆弱性评估方法[J]. 浙江大学学报(工学版), 2016, 50(6): 1119-1125.