Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
土木与交通工程     
平板型铝合金格栅结构支座节点的承载性能
陈伟刚,邓华, 白光波, 董石麟, 朱忠义
1. 浙江大学 空间结构研究中心,浙江 杭州 310058；2. 浙江省空间结构重点实验室,浙江 杭州 310058．
3. 北京市建筑设计研究院有限公司,北京 100045
Load bearing behavior of bearing joint of flat aluminum alloy lattice structures
CHEN Wei gang, DENG Hua,BAI Guang bo,DONG Shi lin, ZHU Zhong yi
1. Space Structures Research Center, Zhejiang University, Hangzhou 310058, China；
2. Zhejiang Provincial Key Laboratory of Space Structures, Zhejiang University, Hangzhou 310058, China;
3. Beijing Institute of Architectural Design (Group) Company Limited, Beijing 100045, China
 全文: PDF(3265 KB)   HTML
摘要：

通过有限元分析与足尺试验考察平板型铝合金格栅结构支座节点的承载性能.加载试验揭示了支座节点的位移、应变发展特点及破坏模式.有限元分析给出了支座节点中的杆件、环槽铆钉及盖板的应力分布状况.研究表明：支座节点的破坏为位于工字铝受拉翼缘的最外排铆钉孔处发生断裂；与受拉翼缘连接的下盖板存在传递路径明显的高应力区，但由于分布区域较窄并未导致盖板破坏，而上盖板的应力要低很多；受拉翼缘断裂截面处的环槽铆钉处于最不利的拉弯受力状态，但并未发生破坏；当杆件断裂时，承受的极限弯矩约为纯弯状态下强度设计值的0.9倍，剪弯比可达0.3；节点的有限元结果与试验结果吻合较好，反映了数值模拟方法的有效性.
Abstract:

The load bearing behaviors of bearing joint of flat aluminum alloy lattice structures were investigated by means of finite element analysis and fullscale experiment. The loading test revealed the characteristics of displacement and strain developments of the bearing joint as well as its damage modes. By adopting the finite element analysis, the stress distributions respectively in members, lockbolts and cover plates of the bearing joint were presented. Results show that the outermost row of bolt holes on the tensile flange of aluminum alloy Ibeams ruptures and causes the damage of the bearing joint. An obvious highstress zone exists on the lower cover plate connected with the tensile flange though it is too narrow to induce the fracture of cover plates, while stresses on the upper cover plate are much smaller. The lockbolts in the fracture section of the tensile flange lie in the most unfavorable tensilebending state, but no damage happens. When the fracture appears in the Ibeam, the corresponding ultimate moment is approximately 0.9 times the design strength of aluminum Ibeams under pure bending, and the momentshear ratio reaches 0.3. The results of numerical analysis well coincide with those of the loading test, indicating the validity of the suggested  numerical simulation method.
出版日期: 2017-01-14
:  TU 395  
通讯作者: 邓华(1971-)，男，教授,博导.ORCID: 0000000207920518.     E-mail: denghua@zju.edu.cn
作者简介: 陈伟刚(1986-)，男，博士生，从事空间结构等研究.ORCID: 0000000150255421. E-mail: wgchen@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

陈伟刚,邓华, 白光波, 董石麟, 朱忠义. 平板型铝合金格栅结构支座节点的承载性能[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008973X.2016.05.004.

CHEN Wei gang, DENG Hua,BAI Guangbo,DONG Shi lin, ZHU Zhong yi. Load bearing behavior of bearing joint of flat aluminum alloy lattice structures. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008973X.2016.05.004.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2016.05.004    或    http://www.zjujournals.com/eng/CN/Y2016/V50/I5/831

［1］ 邓华,陈伟刚,白光波,等. 铝合金板件环槽铆钉搭接连接受剪性能试验研究［J］. 建筑结构学报.2016(01): 143-149．
DENG Hua, CHEN Weigang, BAI Guangbo, et al. Experimental study on shearing behavior of lockbolted lap connection for aluminum alloy plates ［J］.Journal of Building Structures. 2016(01): 143-149．
［2］ 杨联萍,韦申,张其林. 铝合金空间网格结构研究现状及关键问题［J］. 建筑结构学报. 2013, 34(2): 119, 60
YANG Lianping, WEI Shen, ZHANG Qiling. Aluminum reticulated spatial structures: state of the art and key issues ［J］. Journal of Building Structures, 2013, 34(2): 119, 60．
［3］ HWANG K J. Advanced investigations of grid spatial structures considering various connection systems ［D］. Stuttgart: University of Stuttgart, 2010: 11-45．
［4］ 沈祖炎,郭小农,李元齐. 铝合金结构研究现状简述［J］. 建筑结构学报, 2007, 28(6): 100-109．
SHEN Zuyan, GUO Xiaonong, LI Yuanqi. State of the arts of research on aluminum alloy structures ［J］. Journal of Building Structures, 2007, 28(6): 100-109.
［5］ GUO Xiaonong, XIONG Zhe, LUO Yongfeng, et al. Experimental investigation on the semirigid behaviour of aluminium alloy gusset joints ［J］. ThinWalled Structures. 2015, 87 (2): 30-40．
［6］ GB50429—2007. 铝合金结构设计规范［S］. 北京: 中国计划出版社, 2007:14-17．
GB50429—2007. Code for design of aluminum structures［S］. Beijing: China Planning Press, 2007: 14-17.
［7］ 孙训方,方孝淑,关来泰. 材料力学［M］. 北京: 高等教育出版社, 2001：90-124．
［8］ RAMBERG W, OSGOOD W R. Description of stressstrain curves by three parameters ［R］. Washington DC: National advisory committee for aeronautics, 19-43．
［9］ MAZZOLANI F M. Aluminum alloy structures ［M］. 2th ed. Boca Raton : The Chemical Rubber Company Press, 1994:35-37.
［10］ RASMUSSEN K J R. Fullrange stressstrain curves for stainless steel alloys ［J］. Journal of Constructional Steel Research. 2003, 59(1): 47-61．
［11］ 陈伟刚. 平板型铝合金格栅结构板式节点的受力性能研究［D］. 杭州: 浙江大学, 2015: 34-56．
CHEN Weigang. Investigation on mechanical behavior of gusset joints of flat aluminum alloy lattice structures ［D］. Hangzhou: Zhejiang University, 2015: 34-56．
No related articles found!