Please wait a minute...
J4  2010, Vol. 44 Issue (11): 2154-2158    DOI: 10.3785/j.issn.1008973X.2010.11.019
能源工程     
仪表板的结构-声灵敏度分析及声学优化设计
陈馨蕊,郝志勇,杨陈
浙江大学 机械与能源工程学院,浙江 杭州 310027
Acoustic optimization design of laminated automotive dash with
structural-acoustic sensitivity analysis
CHEN Xin-rui, HAO Zhi-yong, YANG Chen
College of Mechanical and Energy Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要:

为了研究各铺层厚度对复合结构隔声性能的影响,设计出声学性能最优的仪表板.由结构-声场耦合有限元方程计算某复合仪表板各铺层厚度对其透射侧一点声压的灵敏度,根据结构-声学灵敏度结果,以仪表板透射侧一点的声压最小为优化目标,各铺层厚度为设计变量,仪表板总质量为约束条件,用修正的可行方向法优化1 500 Hz以内的声学性能.结果表明,与原单层镁质仪表板相比,优化后的镁合金复合仪表板重量减轻1.25 kg.用结构-声耦合法计算二者的声学性能,透射侧总声压级由128.2 dB下降至124.2 dB,实现仪表板轻量化、低噪声的设计要求.

Abstract:

To get best acoustic performance of a dash panel, influence of each layer‘s thickness on sound insulation performance of laminated structure was researched. Based on structural-acoustic coupling finite element equations, the sensitivity of each layer‘s thickness of laminated dash and sound pressure at transmission side was calculated. According to the structure-acoustic sensitivity, minimizing sound pressure at the transmission side of the dash was used as the optimize objective, subject to the limit of total weight, layers thicknesses were design variables. The dash’s acoustic performance within 1 500 Hz was optimized by modified method of feasible directions. Compared with original single-layer magnesium alloy dash, the  laminated dash with optimized reduces the weight by 35%. And calculating the acoustic performance of two dashes with structure-sound interaction method, the results indicate that the overall sound pressure level at transmission side of the dash drops from 128.2 dB to 124.2 dB. The light-weight, low-noise design for magnesium dash is achieved.

出版日期: 2010-12-23
:  O 422  
基金资助:

“十一五”科技支撑计划资助项目(2006BA104B042);国家自然科学基金资助项目(10672141).

通讯作者: 郝志勇,男,教授,博导.     E-mail: haozy@zju.edu.cn
作者简介: 陈馨蕊(1984-),女,河北石家庄人,博士生,主要从事汽车振动与噪声控制研究.E-mail: ruirui-welcome@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

陈馨蕊,郝志勇,杨陈. 仪表板的结构-声灵敏度分析及声学优化设计[J]. J4, 2010, 44(11): 2154-2158.

CHEN Xin-rui, HAO Zhi-yong, YANG Chen. Acoustic optimization design of laminated automotive dash with
structural-acoustic sensitivity analysis. J4, 2010, 44(11): 2154-2158.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2010.11.019        http://www.zjujournals.com/eng/CN/Y2010/V44/I11/2154

[1] 訾炳涛, 王辉. 镁合金及其在工业中的应用[J]. 稀有金属, 2004, 28(1): 229-232.
ZI Bingtao, WANG Hui. Magnesium alloy and its applications in industry [J]. Chinese Journal of Rare Metals, 2004, 28(1): 229-232.
[2] HAMBRIC S A. Sensitivity calculation for broadband acoustic radiated noise design optimization problems [J]. J Vib Acoust, 1995, 117(1): 136-144.
[3] CHOI K K, SHIM I, WANG S. Design sensitivity analysis of structureinduced noise and vibration [J]. J Vib Acoust, 1997, 119(3): 173-179.
[4] WANG S. Design sensitivity analysis of noise, vibration, and harshness of vehicle body structure [J]. Mech Struct Mach, 1999, 27 (3): 317-336.
[5] 白杨, 汪鸿振. 声学结构设计灵敏度分析[J]. 振动与冲击, 2003, 22 (3): 43-45.
BAI Yang, WANG Hongzhen. Acousticstructural design sensitivity analysis [J]. Journal of Vibration and Shock, 2006, 22 (3): 43-45.
[6] LAMANCUSA J S. Numerical optimization techniques for structuralacoustic design of rectangular panels [J]. Computer and Structures, 1993, 48 (4): 661-675.
[7] 张军. 声学结构灵敏度及结构声学优化设计研究[D]. 大连: 大连交通大学, 2006: 64-77.
ZHANG Jun. Research on acousticstructure sensitivity and structureacoustic optimization design[D]. Dalian: Dalian Jiaotong University, 2006: 64-77.
[8] 隋允康, 杜家政, 彭细荣. MSC.Nastran有限元动力分析与优化设计使用教程[M]. 北京: 科学出版社, 2004: 166-174.
[9] 李增刚. Nastran快速入门与实例[M]. 北京: 国防工业出版社, 2007: 156-166.

No related articles found!