机械工程、电气工程 |
|
|
|
|
复杂自由曲面模型的局部协调设计技术 |
边柯柯,王青,李江雄,柯映林 |
(浙江大学 流体传动及控制国家重点实验室,浙江 杭州 310027) |
|
Local consistent mending technique for complex freeform surface model |
BIAN Keke, WANG Qing, LI Jiangxiong, KE Yinglin |
(State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China ) |
引用本文:
边柯柯, 王青, 李江雄, 等. 复杂自由曲面模型的局部协调设计技术[J]. J4, 2009, 43(6): 1118-1123.
BIAN Ke-Ke, WANG Jing, LI Jiang-Xiong, et al. Local consistent mending technique for complex freeform surface model. J4, 2009, 43(6): 1118-1123.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2009.06.026
或
http://www.zjujournals.com/eng/CN/Y2009/V43/I6/1118
|
[1] HAMANN B,JEAN B A.Interactive surface correction based on a local approximation scheme[J].Computer Aided geometric Design,1996,13(4):351368.
[2] 贾明,吕震,李永青,等.基于B样条曲面裁剪计算的局部协调设计[J].机械工程学报,2003,39(2):7478.
JIA Ming,LV Zhen,LI Yong-qing,et al.Local coincided design based on trimmed B-spline surfaces[J].Chinese Journal of Mechanical Engineering,2003,39(2):7478.
[3] 柯映林,范树迁.复杂曲面局部协调设计技术[J].计算机辅助设计与图形学学报,2005,17(3):418424.
KE Ying-lin,FAN Shu-qian.Local consistent mending technique for complex surfaces[J].Journal of Computer Aided Design & Computer Graphics,2005,17(3):418424.
[4] 范树迁,李江雄,柯映林.自由曲面模型的全局美化技术[J].机械工程学报,2007,43(5):175181.
FAN Shu-qian,LI Jiang-xiong,KE Ying-lin.Global beautification technique for freeform surface model[J].Chinese Journal of Mechanical Engineering,2007,43(5):175181.
[5] 朱伟东. 反求工程中基于几何约束的模型重建理论及应用研究[D].杭州:浙江大学,2007:109120.
ZHU Wei-dong.Research on the theory and application of geometric constraint based model reconstruction in reverse engineering[D].Hangzhou:Zhejiang University,2007:109120.
[6] KIMURA M,SAITO T,SHINYA M.Surface deformation with differential geometric structures[J].Computer Aided Geometric Design,1996,13(3):243256.
[7] SHI X Q,WANG T J,WU P R,et al.Reconstruction of convergent G1 smooth B-spline surfaces[J].Computer Aided Geometric Design,2004,21(9):893913.
[8] WELCH W,WITKIN A.Variational surface modelling[J].ACM SIGGRAPH Computer Graphics,1992,26(2):157166.
[9] PARK H,KIM K,LEE S-C.A method for approximate NURBS curve compatibility based on multiple curve refitting[J].Computer Aided Design,2000,32(4):237252.
[10] 陈曦. 反求工程中基于点云的特征挖掘技术研究[D].杭州:浙江大学,2005:2733.
CHEN Xi.Study on feature mining technology based on point cloud in reverse engineering[D].Hangzhou:Zhejiang University,2005:2733.
[11] MA W Y,KRUTH J P.Parameterization of randomly measured points for least squares fitting of B-spline curves and surfaces[J].Computer Aided Design,1995,27(9):663675.
[12] WEISS V,ANDOR L,RENNER G,et al.Advanced surface fitting techniques[J].Computer Aided Geometric Design,2002,19(1):1942. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|