Please wait a minute...
浙江大学学报(工学版)  2018, Vol. 52 Issue (2): 255-260    DOI: 10.3785/j.issn.1008-973X.2018.02.007
机械与动力工程     
粗糙表面切向接触刚度概率分析方法
王菲菲, 徐颖强, 刘楷安
西北工业大学 机电学院, 陕西 西安 710072
Probability analysis method of tangential contact stiffness on rough surfaces
WANG Fei-fei, XU Ying-qiang, LIU Kai-an
School of Mechanical and Electrical Engineering, Northwestern Polytechnical University, Xi'an 710072, China
 全文: PDF(1598 KB)   HTML
摘要:

针对粗糙表面微凸体的多样性引起的接触切向刚度的变化,提出粗糙表面切向接触刚度概率分析方法.基于Hertz理论和GW模型,考虑微凸体接触半径与高度均服从正态分布,得到各自的概率密度函数.运用接触力学和统计学原理,计算粗糙表面微凸体的个数,建立粗糙表面切向接触刚度的概率统计模型.采用控制变量法,研究外界载荷、摩擦系数和统计参数对切向接触刚度的影响,与同种工况下分形模型的计算结果与实验结果进行对比.研究结果表明粗糙表面切向接触刚度与法向载荷和摩擦系数成正相关,与切向载荷成负相关;微凸体之间高度或接触半径的正态分布标准差越小,切向接触刚度越大.这与同条件下分形模型及实验得到的结果趋势相一致.

Abstract:

A probability analysis method of tangential contact stiffness on rough surfaces was proposed for the variation of tangential contact stiffness by asperity diversity. The probability density functions were obtained based on Hertz theory and GW model, supposing that the contact radius and height of the asperities obeyed the normal distribution. The number of the asperities on the rough surface was calculated by using the contact mechanics and the statistical principle. Then the probability statistical model of the tangential contact stiffness on rough surfaces was established. The effects on the tangential contact stiffness were analyzed about variable external loads, friction coefficient and statistical parameters by using the control variables method. The probability model results were compared with the fractal model results and the experimental results. The tangential contact stiffness on rough surfaces is positively related to the normal load and friction coefficient, negatively related to the tangential load. The smaller the standard deviation of the normal distribution of the height or of the contact radius among different asperities are, the greater the tangential contact stiffness is. The results accorded with the fractal model results and the experimental results under the same material and roughness.

收稿日期: 2017-01-25 出版日期: 2018-03-09
CLC:  TH117  
基金资助:

国家自然科学基金资助项目(51675427,50875214,10672134).

通讯作者: 徐颖强,男,教授.orcid.org/0000-0002-1200-7280.     E-mail: xuyngqng@nwpu.edu.cn
作者简介: 王菲菲(1993-),女,硕士生,从事接触表面振动特性方面等研究.orcid.org/0000-0002-6648-2749.E-mail:281403434@qq.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章  

引用本文:

王菲菲, 徐颖强, 刘楷安. 粗糙表面切向接触刚度概率分析方法[J]. 浙江大学学报(工学版), 2018, 52(2): 255-260.

WANG Fei-fei, XU Ying-qiang, LIU Kai-an. Probability analysis method of tangential contact stiffness on rough surfaces. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(2): 255-260.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.02.007        http://www.zjujournals.com/eng/CN/Y2018/V52/I2/255

[1] 雷海东, 段芳莉, 仇和兵, 等. 纳米级粗糙表面接触行为的分子动力学模拟[J]. 中国表面工程, 2010, 23(5):27-34. LEI Hai-dong, DUAN Fang-li, QIU He-bing, et al. Molecular dynamics simulation of contact mechanics between nanoscale rough surfaces[J]. China Surface Engineering,2010, 23(5):27-34.
[2] BEHESHTI A, KHONSARI M M. Asperity micro-contact models as applied to the deformation of rough line contact[J]. Tribology International, 2012, 52(3):61-74.
[3] 李万钟, 徐颖强, 孙戬, 等. 粗糙表面弹塑性加卸载多级接触模型[J]. 中国表面工程, 2015, 28(4):39-46. LI Wan-zhong, XU Ying-qiang, SUN Jian, et al. Multilevel contact model of elastic-plastic loading and unloading on rough surfaces[J]. China Surface Engineering, 2015, 28(4):39-46.
[4] IBRAHIM R A, PETTIT C L. Uncertainties and dynamic problems of bolted joints and other fasteners[J]. Journal of Sound and Vibration,2005, 279(3/5):857-936.
[5] 李辉光, 刘恒, 虞烈. 考虑接触刚度的燃气轮机拉杆转子动力特性研究[J]. 振动与冲击, 2012, 31(7):4-8. LI Hui-guang, LIU Heng, YU Lie. Dynamic characteristics of a rod fastening rotor for gas turbine considering contact stiffness[J]. Journal of Vibration and Shock, 2012, 31(7):4-8.
[6] MAO K M, LI B, WU J, et al. Stiffness influential factors-based dynamic modeling and its parameter identification method of fixed joints in machine tools[J]. International Journal of Machine Tools and Manufacture,2010, 50(2):156-164.
[7] 余同希,[澳]卢国兴, 著. 华云龙, 译. 材料与结构的能量吸收:耐撞性·包装·安全防护[M]. 北京:化学工业出版社, 2005:137-145.
[8] GREENWOOD J A, WILLIAMSON J B P. Contact of nominally flat surfaces[J]. Proceedings of the Royal Society of London,1966, 295(1442):300-319.
[9] GREENWOOD J A, TRIPP J H. The elastic contact of rough spheres[J]. Journal of Applied Mechanics, 1967, 34(1):153-159.
[10] WHITEHOUSE D J, ARCHARD J F. The properties of random surfaces of significance in their contact[J]. Proceedings of the Royal Society of London Series A,1971, 316(1524):97-121.
[11] MAJUMDAR A, BHUSHAN B. Fractal model of elastic-plastic contact between rough surfaces[J]. Journal of Tribology,1991, 113(1):1-11.
[12] 张学良, 温淑花, 徐格宁, 等. 结合部切向接触刚度分形模型研究[J]. 应用力学学报, 2003, 20(1):70-72. ZHANG Xue-liang, WEN Shu-hua, XU Ge-ning, et al. Fractal model of the tangential contact stiffness of machined surfaces in contact[J]. Chinese Journal of Applied Mechanics,2003, 20(1):70-72.
[13] 王南山, 张学良, 兰国生, 等. 临界接触参数连续的粗糙表面法向接触刚度弹塑性分形模型[J]. 振动与冲击, 2014, 33(9):71-77. WANG Nan-shan, ZHANG Xue-liang, LAN Guo-sheng, et al. Elastoplastic fractal model for normal contact stiffness of rough surfaces with continuous critical contact parameters[J]. Journal of Vibration and Shock,2014, 33(9):72-77.
[14] 李小彭, 鞠行, 赵光辉, 等. 考虑摩擦因素的结合面切向接触刚度分形预估模型及其仿真分析[J]. 摩擦学学报, 2013, 33(5):463-468. LI Xiao-peng, JU Xing, ZHAO Guang-hui, et al. Fractal prediction model for tangential contact stiffness of joint surface considering friction factors and its simulation analysis[J]. Tribology, 2013, 33(5):463-468.
[15] 李小彭, 王伟, 赵米鹊, 等. 考虑摩擦因素影响的结合面切向接触阻尼分形预估模型及其仿真[J]. 机械工程学报, 2012, 48(23):46-50. LI Xiao-peng, WANG Wei, ZHAO Mi-que, et al. Fractal prediction model for tangential contact damping of joint surface considering friction factors and its simulation[J]. Journal of Mechanical Engineering,2012, 48(23):46-50.
[16] 李玲, 蔡力钢, 蔡安江, 等. 固定结合面切向接触刚度通用性建模方法[J]. 计算机集成制造系统, 2015, 21(8):2108-2115. LI Ling, CAI Li-gang, CAI An-jiang, et al. Universal modeling method for tangential stiffness of fixed joint interfaces[J].Computer Integrated Manufacturing Systems, 2015, 21(8):2108-2115.
[17] 杨红平, 傅卫平, 王雯, 等. 基于分形几何与接触力学理论的结合面法向接触刚度计算模型[J]. 机械工程学报, 2013, 49(1), 102-107. YANG Hong-ping, FU Wei-ping, WANG Wen, et al. Calculation model of the normal contact stiffness of joints based on the fractal geometry and contact theory[J]. Journal of Mechanical Engineering, 2013, 49(1), 102-107.
[18] 刘鹏, 陈奇, 樊浩, 等. 考虑摩擦的球面切向接触刚度分形模型研究[J]. 中国机械工程, 2016, 27(20):2773-2778. LIUPeng, CHEN Qi, FAN Hao, et al. Research on fractal model of TCS between spherical surfaces considering friction factors[J]. China Mechanical Engineering,2016, 27(20):2773-2778.
[19] POLYCARPOU A, ETSION I. Analytical approximations in modeling contacting rough surfaces[J]. Journal of Tribology, 1999, 121(1):234-239.
[20] 尤晋闽, 陈天宁. 结合面静态接触参数的统计模型研究[J]. 振动与冲击, 2010, 29(11):47-50. YOU Jin-min, CHEN Tian-ning. Statistical model for static contact parameters of joint surfaces[J]. Journal of Vibration and Shock, 2010, 29(11):47-50.
[21] WU J J. The properties of asperities of real surfaces[J]. Journal of Tribology,2001, 123(4):872-883.
[22] 师俊平, 朱红, 曹小杉, 等. 结合面切向接触刚度的概率统计模型[J]. 工程力学, 2014, 31(6):226-231. SHI Jun-ping, ZHU Hong, CAO Xiao-shan, et al. Profitability and statistic model of tangent contact stiffness of joint surfaces[J]. Engineering Mechanics, 2010, 31(6):226-231.
[23] 张学良. 机械接触面动态特性及应用[M]. 北京:中国科学技术出版社, 2002:35-38.
[24] 党会鸿. 机械结合面接触刚度研究[D]. 大连:大连理工大学, 2015. DANG Hui-hong. The research on contact stiffness of joint surface[D]. Dalian:Dalian University of Technology, 2015.
[25] 田红亮, 陈从平, 方子帆, 等. 应用改进分形几何理论的结合部切向刚度模型[J]. 西安交通大学学报, 2014, 48(7):46-51. TIAN Hong-liang, CHEN Cong-ping, FANG Zi-fan, et al. Tangential stiffness model for joint interface adopting the revised fractal geometric theory[J]. Journal of Xi'an Jiaotong University,2014,48(7):46-51.
[26] JIANG Shuyun, ZHENG Yunjian, ZHU Hua. A contact stiffness model of machined plane joint based on fractal theory[J]. Journal of Tribology, 2010,132(0114011):1-7.
[27] 温诗铸, 黄平. 摩擦学原理[M].北京:清华大学出版社, 2008:271-274.

[1] 赵斌, 张松, 李剑峰. 基于零件摩擦学性能的磨削参数优化[J]. 浙江大学学报(工学版), 2018, 52(1): 16-23.
[2] 刘文, 杨云, 林腾蛟, 张晋红. 偏心误差影响下的斜齿轮摩擦激励计算方法[J]. 浙江大学学报(工学版), 2017, 51(8): 1559-1567.