机械与能源工程 |
|
|
|
|
预连接工艺对壁板动态特性的影响分析 |
曲巍崴, 卢贤刚, 杨迪 |
浙江大学 机械工程学院 浙江省先进制造技术重点研究实验室,浙江 杭州,310027 |
|
Influence of pre-joining scheme on panel dynamic characteristic |
QU Wei wei, LU Xian gang, YANG Di |
Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province, College of Mechanical Engineering, Zhejiang University, Hangzhou,310027, China |
引用本文:
曲巍崴, 卢贤刚, 杨迪. 预连接工艺对壁板动态特性的影响分析[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2017.02.015.
QU Wei wei, LU Xian gang, YANG Di. Influence of pre-joining scheme on panel dynamic characteristic. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2017.02.015.
|
[1] CHENG H, WANG R X, LI Y, et al. Modeling and analyzing of variation propagation in aeronautical thinwalled structures automated riveting [J]. Assembly Automation, 2012, 32(1): 25-37.
[2] CHENG H, LI Y, ZHANG K, et al. Variation modeling of aeronautical thinwalled structures with multistate riveting [J]. Journal of Manufacturing Systems, 2011, 30(2): 101-115.
[3] LIU G, TANG W, KE Y L, et al. Modeling of fast prejoining processes optimization for skinstringer panels [J]. Assembly Automation, 2014, 34(4): 323-332.
[4] LIU G, TANG W, KE Y L, et al. Prejoining process planning model for a batch of skinstringer panels based on statistical clearances [J]. The International Journal of Advanced Manufacturing Technology, 2015, 78(1/4): 41-51.
[5] 孙鑫.航空材料自动化精密制孔工艺研究[D].南京:南京航空航天大学,2014.
SUN Xin. Research on automatic precision drilling process of aeronautic material [D]. Nanjing :Nanjing University of Aeronautics and Astronautics, 2014.
[6] 秦国华,吴竹溪,张卫红.薄壁件的装夹变形机理分析与控制技术[J].机械工程学报,2007,43(4): 211-216.
QIN Guo hua, WU Zhu xi, ZHANG Wei hong. Analysis and control technique of fixturing deformation mechanism of thinwalled workpiece [J]. Chinese Journal of Mechanical Engineering,2007,43(4): 211-216.
[7] 王军,耿世民,张辽远,等.薄壁壳体件装夹变形机理有限元分析与控制[J].兵工学报,2011,32(8): 1008-1015.
WANG Jun, GENG Shi min,ZHANG Liao yuan, et al. Finite element analysis and control of clamping deformation mechanism of thinwall shell workpiece[J]. Acta Armamentarii,2011,32(8): 1008-1015.
[8] KAYA N. Machining fixture locating and clamping position optimization using genetic algorithms [J]. Computers in Industry, 2006, 57(2): 112-120.
[9] LIU S C, HU S J. Variation simulation for deformable sheet metal assemblies using finite element methods [J]. Journal Of Manufacturing Science And Engineering, 1997, 119(3): 368-374. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|