Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
土木工程     
空气对预应力薄膜结构模态的影响
陈宇峰, 陈务军, 邱振宇, 赵兵
上海交通大学 空间结构研究中心,上海 200240
Effects of air on modal behavior of pre-stressed membrane structure
CHEN Yu-feng, CHEN Wu-jun, QIU Zhen-yu, ZHAO Bin
Space Structures Research Centre, Shanghai Jiao Tong University, Shanghai 200240, China
 全文: PDF(1257 KB)   HTML
摘要：

为了提供薄膜结构模态测试和校验的分析方法,揭示空气对预应力薄膜结构模态的影响,分别采用直接施加初应力和施加温度荷载的方法给薄膜结构导入预应力,并分析预应力引入方式对模态的影响.基于流固耦合势流体原理,研究空气对预应力薄膜模态的影响.利用双轴张拉装置和无接触激光测振系统对ETFE薄膜阵面进行模态实验和识别,并验证数值模拟方法.研究结果表明：预应力导入方式对模态分析无影响,空气对预应力薄膜的模态有着显著影响,其影响的大小与薄膜材料以及空气密度相关.
Abstract:

The influence of air on pre-stressed membrane struture was revealed in order to give an anlysis method for modal behavior test and calibration of membrane structure. First, pre-stress of membrane structure was introduced by appling initial stress directly and adding temperature load, respectively, and then their effects on the modal behavior were analyzed. Second, the effect of air on pre-stressed membrane structure was studied based on the potential fluid theory of fluid-structure interaction. Finally, modal behavior test and identifiaction on ETFE film reflect-array were taken using biaxial extension test set-up and non-contact laser vibration system, and the numerical simulation method was verified. The test results reveal that the introducing method of prestress has nothing to do with the modal behavior analysis, while air has a significant impact on the modal behavior of pre-stressed membrane structures, and its impact is related to the film material and air density.
出版日期: 2015-06-01
:  TU 399  
基金资助:

国家自然科学基金资助项目（51278299）
通讯作者: 陈务军，男.博导     E-mail: cwj@stju.edu.cn
作者简介: 陈宇峰(1977—)，男，博士生，从事薄膜结构力学性能研究.E-mail: cyf221722@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

陈宇峰, 陈务军, 邱振宇, 赵兵. 空气对预应力薄膜结构模态的影响[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.06.017.

CHEN Yu-feng, CHEN Wu-jun, QIU Zhen-yu, ZHAO Bin. Effects of air on modal behavior of pre-stressed membrane structure. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.06.017.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.06.017    或    http://www.zjujournals.com/eng/CN/Y2015/V49/I6/1123

［1］ LAI C Y, YOU Z, PELLEGRINO S. Shape of deployable membrane reflectors ［J］. Journal of Aerospace Engineering, 1998, 11(3): 73-80.
［2］ MALONE P K, WILLIAMS G T. Lightweight inflatable solar array ［J］. Journal of Propulsion and Power, 1996, 12(5): 866-872.
［3］ NABOULSI S. Investigation of geometric imperfection in inflatable aerospace structures ［J］. Journal of Aerospace Engineering, 2004, 17(3): 98-105.
［4］ WONG Y W, PELLEGRINO S. Wrinkled membranes part I: experiments ［J］. Journal of Mechanics of Materials and Structures, 2006, 1(1): 123.
［5］ XIAO W W, CHEN W J, FU G Y. Wrinkle analysis of the space planar film reflect-array ［J］. Journal of Zhejiang University: Science A, 2011,12(1): 24-32.
［6］ XIAO W W, CHEN W J, FU G Y. Wrinkle analysis of the inflatable antenna ［J］. Journal of Shanghai Jiao Tong University: Science, 2011, 16(1): 24-33.
［7］ 肖薇薇,陈务军,付功义. 空间薄膜阵面预应力导入效应及影响因素［J］.宇航学报, 2010, 31(3): 845-849.
XIAO Wei-wei, CHEN Wu-jun , FU Gong-yi. Pre-stressed introduction effects and influence factors investigation for the space plannar film reflect-arry ［J］. Journal of astronatics, 2010, 31(3): 845-849.
［8］ 肖薇薇.空间充气可展薄膜天线结构分析与力学特性研究［D］.上海：上海交通大学,2010: 32-44.
XIAO Wei-wei. Structural analysis procedures and mechanical behavior of the space inflatable film antenna ［D］. Shanghai:  Shanghai Jiao Tong University, 2010: 32-44.
［9］ DOWELL E, DUGUNDJI J, PERKIN B. Subsonic flutter of panels on continuous elastic foundations［J］. Journal of American Institute of Aeronautics and Astronautics, 1963, 1(5): 1146-1154.
［10］ MINAMI H. Added mass of a membrane vibrating at finite amplitude ［J］. Journal of Fluids and Structures, 1998, 12(7): 919-932.
［11］ YADYKIN Y, TENETOV V, LEVIN D. The added mass of a flexible plate oscillating in a fluid ［J］. Journal of Fluids and Structures, 2003,17(1): 115-123.
［12］ LI Y Q, WANG L, SHEN Z Y, et al. Added mass estimation of flat membranes vibrating in still air［J］. Journal of Wind Engineering and Industrial Aerody-namics, 2011, 99(8): 815-824.
［13］ 王磊,李元齐,沈祖炎.薄膜振动附加质量实验研究［J］.振动工程学报, 2011,24(2): 125-132.
WANG Lei, LI Yuan-qi, SHEN Zu-yan. Experimental investigation on the added mass of membranes vibrating in air ［J］. Journal of Vibration Engineering, 2011,24 (2): 125132.
［14］ 陈宇峰,陈务军,何艳丽,等.柔性飞艇主气囊干湿模态分析与影响因素［J］.上海交通大学学报,2014,48（2）: 234-238.
CHEN Yu-feng, CHEN Wu-jun, HE Yan-li, et al. Dry and wet modal analysis and evaluation of influence factors for the flexible airship envelop［J］. Journal of Shanghai Jiao Tong University, 2014, 48 (2): 234-238.
［15］ 高海健,陈务军,付功义.预应力薄膜充气梁模态的分析方法及特性［J］.华南理工大学学报, 2010, 38(7): 135-139.
GAO Hai-jian, CHEN Wu-jun, FU Gong-yi. Modal analysis method and modal behavior of pre-stressed inflatable fabric beam ［J］. Journal of South China University of Technology， 2010, 38(7): 135-139.
［16］ 高海健.大型平流层空间平台柔性飞艇结构分析理论与特性研究［D］.上海：上海交通大学,2010: 86-107.
GAO Hai-jian. Structure analysis theory and performance research for large flexible airship of stratospheric platform［D］. Shanghai: Shanghai Jiao Tong University, 2010: 86-107.
[1] 王戴薇,罗尧治. 平行四边形环链机构构形[J]. J4, 2013, 47(5): 812-817.