Analysis of buckling behavior of planar membrane structures based on vector form intrinsic finite element" /> 平面薄膜结构屈曲行为的向量式有限元分析
Please wait a minute...
浙江大学学报(工学版)
土木工程     
平面薄膜结构屈曲行为的向量式有限元分析
王震1,2, 赵阳2, 杨学林1
1. 浙江省建筑设计研究院,浙江 杭州 310006; 2. 浙江大学 空间结构研究中心,浙江 杭州 310058
Analysis of buckling behavior of planar membrane structures based on vector form intrinsic finite element
WANG Zhen1,2, ZHAO Yang2, YANG Xue-lin1
1. Zhejiang Province Institute of Architectural Design and Research, Hangzhou 310006, China; 2. Space Structure Research Center, Zhejiang University, Hangzhou 310058, China
 全文: PDF(2303 KB)   HTML
摘要:

针对平面薄膜结构在外荷载作用下容易出现局部褶皱和褶皱扩展的现象,分析平面薄膜结构的屈曲行为.基于向量式有限元薄膜单元基本理论,引入面内应力刚化和面外初始缺陷,实现初始预应力平衡状态和触发面外褶皱屈曲变形.推导向量式有限元的力控制和位移控制处理方法,进而跟踪平面薄膜结构的局部褶皱(屈曲)和褶皱扩展(后屈曲)变形全过程.在此基础上,编制平面薄膜结构的屈曲计算分析程序,并通过矩形薄膜剪切屈曲和圆环薄膜扭转屈曲的算例分析,验证理论推导和所编制程序的有效性和正确性.位移控制法可以越过薄膜结构屈曲的极值点(或分支点),有效跟踪屈曲和后屈曲变形的全过程,并获得屈曲临界极限荷载和屈曲下降段.

Abstract:

Aiming at the situation that planar membrane structure is prone to local wrinkling and wrinkling expansion under external loading, buckling behavior of planar membrane structures was studied. Based on the basic theory of membrane element of vector form intrinsic finite element (VFIFE), in-plane stress stiffening and the out-of-plane initial imperfection were introduced to keep initial prestressed equilibrium state and trigger out-of-plane wrinkling. The force-controlled and displacement-controlled methods of VFIFE were deduced, which were used to track the whole deformation process of local wrinkling (buckling) and wrinkling expansion (post buckling) of planar membrane structures. On this basis, a buckling computer program for planar membrane structures was developed. Analysis of computation examples, such as the shear buckling of rectangular membrane and the torsional buckling of annular membrane, verified the validity and correctness of the theoretical derivation and the computer program. The displacement-controlled method can cross the extremum buckling point (or birfurcation buckling point) of membrane structures and track the whole process of buckling and post buckling effectively. It can also get the critical buckling limit load and the buckling down part.

出版日期: 2015-06-01
:  V 214  
基金资助:

国家自然科学基金资助项目(51378459);浙江省重点科技创新团队资助项目(2010R50034);浙江省建设厅科技资助项目(浙财建\[2013\]357号)

通讯作者: 赵阳,男,教授,博导     E-mail: ceyzhao@zju.edu.cn
作者简介: 王震(1985—),男,工程师,博士,从事钢结构、薄膜结构和向量式有限元研究. E-mail: wzjggc@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

王震, 赵阳, 杨学林. 平面薄膜结构屈曲行为的向量式有限元分析[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.06.016.

WANG Zhen, ZHAO Yang, YANG Xue-lin.

Analysis of buckling behavior of planar membrane structures based on vector form intrinsic finite element
. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.06.016.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.06.016        http://www.zjujournals.com/eng/CN/Y2015/V49/I6/1116

[1] WOOLDRIDGE E M, POWERS C E, TOWNSEND J A, et al. Effects of manufacturing and deployment on thin films for the NGST sunshade [J]. American Institute of Aeronauics and Astronautics (AIAA), 2001, 1349: 113.
[2] MURPHY D, MURPHEY T, GIEROW P. Scalable solar-sail subsystem design concept [J]. Journal of Spacecraft and Rockets, 2003, 40(4): 539-547.
[3] WONG Y W. Analysis of wrinkle patterns in prestressed membrane structure [D]. Cambridge: University of Cambridge, 2000: 11101.
[4] MIYAMURA T. Wrinkling of stretched circular membrane under in-plane torsion: bifurcation analysis and experiments [J]. Engineering Structure, 2000, 22(11): 1407-1425.
[5] 肖薇薇,陈务军,付功义.空间薄膜阵面结构褶皱的实验研究[J].实验力学, 2011, 26(3): 291-296.
XIAO Wei-wei, CHEN Wu-jun, FU Gong-yi. Experimental study of the wrinkle of space planar film reflect-array [J]. Journal of Experimental Mechanics, 2011, 26(3): 291-296.
[6] 谭锋,杨庆山,张建.薄膜结构褶皱分析的有限元法[J].工程力学,2006, 23(增刊1): 62-68.
TAN Feng, YANG Qing-shan, ZHANG Jian. Finite element method of wrinkling analysis of membrane structures [J]. Engineering Mechanics, 2006, 23(supple. 1): 62-68.
[7] 李云良,谭惠丰,王晓华.矩形薄膜和充气管的屈曲及后屈曲行为分析[J].航空学报,2008, 29(4): 886-892.
LI Yun-liang, TAN Hui-feng, WANG Xiao-hua. Analysis of buckling and post-buckling behavior of rectangle membrane and inflatable tube [J]. Acta Aeronautica Et Astronautica Sinica, 2008, 29(4): 886-892.
[8] WONG Y W, PELLEGRINO S. Wrinkled membranes part III: numerical simulations [J]. Journal of Mechanics of Materials and Structures, 2006, 1(1): 61-93.
[9] 王长国.空间薄膜结构皱曲行为与特性研究[D].哈尔滨:哈尔滨工业大学,2007: 28-85.
WANG Chang-guo. Study on wrinkling behavior and characteristic of space membrane structures [D]. Harbin: Harbin Institute of Technology, 2007: 28-85.
[10] TING E C, SHIH C, WANG Y K. Fundamentals of a vector form intrinsic finite element: Part I. Basic procedure and a plane frame element [J]. Journal of Mechanics, 2004, 20(2): 113-122.
[11] TING E C, SHIH C, WANG Y K. Fundamentals of a vector form intrinsic finite element: Part II. plane solid elements [J]. Journal of Mechanics, 2004, 20(2): 123132.
[12] 王震.向量式有限元薄壳单元的理论与应用[D].杭州:浙江大学, 2013: 21-29.
WANG Zhen. Theory and application of thin shell element based on the vector form intrinsic finite element method [D]. Hangzhou: Zhejiang University, 2013: 21-29.
[13] ROSSI R, LAZZARI M, VITALIANI R, et al. Simulation of lightweight membrane structures by wrinkling model [J]. International Journal for Numerical Methods in Engineering, 2005, 62(15): 2127-2153.
[14] LEIFER J, BELVIN W K. Presiction of wrinkle amplitudes in thin film membranes using finite element modeling [C] ∥ Proceedings of the 44th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Norfolk: AIAA, 2003: 111.
[15] 马瑞,张建,杨庆山.基于薄壳单元的膜材褶皱发展过程研究[J].工程力学, 2011, 28(8): 70-76.
MA Rui, ZHANG Jian, YANG Qing-shan. An analysis on transition of membrane wrinkles applying shell elements [J]. Engineering Mechanics, 2011, 28(8): 70-76.
No related articles found!