Please wait a minute...
浙江大学学报(工学版)
电气工程     
直驱采油用永磁同步电机削弱齿槽转矩优化
肖文生1,崔俊国1,刘健1,吴晓东2,黄红胜2
1.中国石油大学(华东) 石油石化新型装备与技术教育部工程研究中心,山东 青岛 266580;2.武汉市江汉石油机械有限公司,湖北 武汉 430040
Optimization study for reducing cogging torque in permanent magnet synchronous motor used for direct-drive oil pumping
XIAO Wen-sheng1, CUI Jun-guo1, LIU Jian1, WU Xiao-dong2, HUANG Hong-sheng2
1. Research Center for New Petroleum and Petrochemical Equipment and Technology, Ministry of Education, China University of Petroleum (East China), Qingdao 266580, China; 2. Wuhan Jianghan Petroleum Machinery Limited Company, Wuhan 430040, China
 全文: PDF(1618 KB)   HTML
摘要:

 提出削弱永磁同步电机齿槽转矩的优化设计方法.在永磁电机设计过程中影响齿槽转矩的参数有多个,但每个参数对齿槽转矩的影响程度不同,为了节约设计时间与成本,采用Plackett-Burman设计从多个设计参数中筛选出影响齿槽转矩的显著因子.应用响应面法(RSM)建立显著因子与齿槽转矩的二阶响应模型并判定拟合模型的有效性,采用有限元法(FEM)分析实验安排以确定回归系数.采用遗传算法(GA)寻优,找到使齿槽转矩最小的最佳解.根据优化结果进行有限元分析可知,与初始值相比,齿槽转矩显著降低,这在很大程度上提高了电机运行的稳定性,降低了运行过程中产生的噪声.通过样机试验证明了该优化设计方法的有效性.

Abstract:

An optimization procedure for reducing the cogging torque of permanent magnet synchronous motor (PMSM) was presented. There are many geometric parameters which have different influences on cogging torque during the design process of PMSM. For saving design time and cost, Plackett-Burman design was employed for the screening activity to find the most significant parameters. The response surface methodology (RSM) was used to build a second-order analytical model between significant parameters and cogging torque and determine the effectiveness of the fitting model. The finite element method (FEM) was used for numerical experiments in order to determine the coefficients of the fitting model. The genetic algorithm (GA) was used to search the optimum solution. The numerical results based on optimization demonstrate that compared with the initial value the cogging torque significantly decreased, which means that the stability of the PMSM will be greatly improved and the noise will be reduced during the working process. The effectiveness of the design procedure was proved by the prototype test.

出版日期: 2018-06-06
:  TM 351  
基金资助:

中央高校基本科研业务费专项资金资助项目(24720146051)

作者简介: 肖文生(1966-),男,教授,博导,从事计算机辅助设计、数字化设计、虚拟现实、石油机械、海洋工程等研究.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

肖文生,崔俊国,刘健,吴晓东,黄红胜. 直驱采油用永磁同步电机削弱齿槽转矩优化[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.01.025.

XIAO Wen-sheng, CUI Jun-guo, LIU Jian, WU Xiao-dong, HUANG Hong-sheng. Optimization study for reducing cogging torque in permanent magnet synchronous motor used for direct-drive oil pumping. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.01.025.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.01.025        http://www.zjujournals.com/eng/CN/Y2015/V49/I1/173

[1] IGOR A, ARTHUR S. Application of permanent-magnet motors in oil production [J]. Journal of Petroleum Technology, 2009, 61(7): 56-57.
[2] 崔俊国,肖文生,董维彬,等. 电动机直驱抽油机的研制及试验[J]. 石油机械,2012,40(10):81-87.
CUI Jun-guo, XIAO Wen-sheng, DONG Wei-bin, et al. Development and test of electric motor direct drive pumping unit [J]. China Petroleum Machinery, 2012, 40(10): 81-87.
[3] PAVLENKO V. Permanent magnet synchronous motor (PMSM): new type of drives for submersible oil pumps [C]∥SPE Russian Oil and Gas Technical Conference and Exhibition. Moscow: SPE, 2008: 1110-1117.
[4] 冀溥,王秀和,王道涵,等. 转子静态偏心的表面式永磁电机齿槽转矩研究[J]. 中国电机工程学报, 2004, 24(9): 188-191.
JI Pu, WANG Xiu-he, WANG Dao-han,et al. Study of cogging torque in surface-mounted permanent magnet motors with static eccentricity [J]. Proceedings of the CSEE, 2004, 24(9): 188-191.
[5] 杨玉波,王秀和,丁婷婷,等. 极弧系数组合优化的永磁电机齿槽转矩削弱方法[J]. 中国电机工程学报, 2007, 27(6): 7-11.
YANG Yu-bo, WANG Xiu-he, DING Ting-ting,et al. Analysis of the optimization of the pole arc combination to reduce the cogging torque in PM motors [J]. Proceedings of the CSEE, 2007, 27(6): 7-11.
[6] HUANG Shou-dao,LIU Jian,GAO Jian,et al. Optimal design of the rotor structure for interior permanent magnet synchronous motor [C]∥3rd IEEE International Conference on Power Engineering, Energy and Electrical Drives. Torremolinos: IEEE, 2011: 6036493.
[7] CHEN Ning-ning, HO S L, FU W N. Optimization of permanent magnet surface shapes of electric motors for minimization of cogging torque using FEM [J]. IEEE Transactions on Magnetics, 2010, 46(6): 2478-2481.
[8] KIM Sung-Il, LEE Ji-young, KIM Young-kyoun, et al. Optimization for reduction of torque ripple in interior permanent magnet motor by using the taguchi method [J]. IEEE Transactions on Magnetics, 2005, 41(5): 1796-1799.
[9] 兰志勇,杨向宇,王芳媛,等. Taguchi方法在内嵌式正弦波永磁同步电机优化设计中的应用[J]. 电工技术学报, 2011, 26(12): 37-42.
LAN Zhi-yong, YANG Xiang-yu, WANG Fang-yuan, et al. Application for optimal designing of sinusoidal interior permanent magnet synchronous motors by using the Taguchi method [J]. Transactions of China Electrotechnical Society, 2011, 26(12): 37-42.
[10] HWANG C C,CHENG S P,LI P L.Design optimization for cogging torque minimization and efficiency maximization of an SPM motor [C]∥IEEE International Electric Machines and Drives Conference. Antalya: IEEE, 2007: 642-645.
[11] HWANG C C, LYU L Y, LIU C T, et al. Optimal design of an spm motor using genetic algorithms and Taguchi method [J]. IEEE Transactions on Magnetics, 2008, 44(11): 4325-4328.
[12] KIM Won-ho,KIM Ki-chan,KIM Seung-joo, et al. A study on the optimal rotor design of LSPM considering the starting torque and effciency [J]. IEEE Transactions on Magnetics, 2009, 45(3): 1808-1811.
[13] HOT K,BODLOVIC P. Multi-objective optimization of permanent magnet motor using Taguchi method [C]∥ISEF 2003-11th International Symposium on Electromagnetic Fields in Electrical Engineering. Maribor, Slovenia: Springer, 2003: 53-58.
[14] ISLAM M S,ISLAM R,SEBASTIAN T,et al.Cogging torque minimization in PM motors using robust design approach [J]. IEEE Transactions on Industry Applications, 2011, 47(4): 1661-1669.
[15] 郭宏,钱浩. 永磁同步电机低转矩脉动的稳健设计[J]. 中国电机工程学报, 2012, 32(24): 88-95.
GUO Hong, QIAN Hao. Robust design for reducing torque ripple in permanent magnet synchronous motor [J]. Proceedings of the CSEE, 2012, 32(24): 88-95.
[16] KIM K C, KOO D H, LEE J. The study on the overhang coefficient for permanent magnet machine by experimental design method [J]. IEEE Transactions on Magnetics, 2007, 43(6): 2483-2485.
[17] COSTA M C, NABETA S I, DIETRICH A B, et al. Optimization of a switched reluctance motor using experimental design method and diffuse elements response surface [J]. IEE Proceedings: Science, Measurement and Technology, 2004, 151(6): 411-413.
[18] COSTA M C, COULOMB J L, MARCHAL Y, et al. An adaptive method applied to the diffuse element approximation in optimization process [J]. IEEE Transactions on Magnetics, 2001, 37(5): 3418-3422.
[19] GIURGEA S, FODOREAN D, CIRRINCIONE G, et al. Multi-model optimization based on the response surface of the reduced FEM simulation model with application to a PMSM [J]. IEEE Transactions on Magnetics, 2008, 44(9): 2153-2157.
[20] FUJISHIMA Y, WAKAO S, YAMASHITA A, et al. Design optimization of a permanent magnet synchronous motor by the response surface methodology [J]. Journal of Applied Physics, 2002, 91(10): 8305-8307.
[21] 闵亚能. 实验设计(DOE)应用指南[M]. 北京:机械工业出版社,2011:273-376.
[22] JABBAR M A, LIU Q H, JOLLY L. Application of response surface methodology (RSM) in design optimization of permanent magnet synchronous motors [C]∥IEEE TENCON 2004 - 2004 IEEE Region 10 Conference: Analog and Digital Techniques in Electrical Engineering. Chiang Mai, Thailand: IEEE, 2004.
[23] 雷英杰,张善文,李续武,等. MATLAB遗传算法工具箱及应用[M]. 西安:西安电子科技大学出版社,2005:146-207.
[24] HASANIEN H M, ABD-RABOU A S, SAKR S M. Design optimization of transverse flux linear motor for weight reduction and performance improvement using response surface methodology and genetic algorithms [J]. IEEE Transactions on Energy Conversion, 2010, 25(3): 598-605.

[1] 宁银行, 刘闯, 干兴业. 两级式无刷混合励磁同步电机的电磁设计及分析[J]. 浙江大学学报(工学版), 2016, 50(3): 519-526.
[2] 张晗妮, 张琪, 黄苏融, 张舟云. 计及轴承传热的高密度永磁电机温升计算[J]. 浙江大学学报(工学版), 2015, 49(12): 2410-2417.
[3] 陈亮亮,祝长生,蒋科坚. 含极间填充块的高速表贴式永磁同步电机转子强度分析[J]. 浙江大学学报(工学版), 2015, 49(9): 1738-1748.
[4] 左曙光,张国辉,吴旭东,高丽华,沈健. 倾斜偏心下轮毂永磁同步电机电磁力分析[J]. 浙江大学学报(工学版), 2015, 49(5): 901-907.
[5] 陈亮亮,祝长生,王萌. 碳纤维护套高速永磁电机热态转子强度[J]. 浙江大学学报(工学版), 2015, 49(1): 162-172.
[6] 左曙光,张国辉,吴旭东,高丽华,沈健. 倾斜偏心下轮毂永磁同步电机电磁力分析[J]. 浙江大学学报(工学版), 2014, 48(12): 1-7.
[7] 韩汇文,祝长生. 表贴式永磁电机电枢反应磁场的子域模型[J]. 浙江大学学报(工学版), 2014, 48(9): 1682-1689.
[8] 肖文生,崔俊国,刘健,吴晓东,黄红胜. 直驱采油用永磁同步电机削弱齿槽转矩优化[J]. 浙江大学学报(工学版), 2014, 48(8): 1-8.
[9] 薛劭申, 许海平, 方程, 牛威昆, 薛 山. 基于载波的多相永磁同步电机谐波平面控制[J]. J4, 2013, 47(12): 2080-2086.
[10] 王保俊, 毕刘新, 陈亮亮, 杨平西, 祝长生. 碳纤维绑扎表贴式高速永磁电机转子强度分析[J]. J4, 2013, 47(12): 2101-2110.
[11] 蔡炯炯, 卢琴芬, 刘晓, 叶云岳. PMLSM推力波动抑制分段斜极方法研究[J]. J4, 2012, 46(6): 1122-1127.
[12] 孙晓东,陈龙,杨泽斌,朱熀秋,嵇小辅. 贝叶斯证据框架下LS-SVM的BPMSM磁链建模[J]. J4, 2012, 46(5): 873-877.
[13] 张玉秋, 刘晓, 叶云岳, 金勇. 双边空心式永磁直线伺服电机的横向边缘效应[J]. J4, 2011, 45(10): 1836-1841.
[14] 吴克元,刘晓,叶云岳. 平板型混合式直线步进电机的关键参数[J]. J4, 2011, 45(9): 1603-1608.
[15] 崔巍,龚宇,江建中,章跃进,杜世勤. 双凸极永磁电机的对称化设计[J]. J4, 2011, 45(5): 825-830.