Please wait a minute...
浙江大学学报(工学版)
能源与机械工程     
面向砂型铸造的碳排放效率建模及评价方法
郑军1,2,唐任仲1
1. 浙江大学 机械工程学系,浙江 杭州 310027; 2. 浙江科技学院 机械与汽车工程学院,浙江 杭州 310023
Carbon efficiency model and evaluation method for sand casting
ZHENG Jun1,2,TANG Ren-zhong1
1. Department of Mechanical Engineering , Zhejiang University, Hangzhou 310027, China; 2. School of Mechanical and Automotive Engineering, Zhejiang University of Science and Technology, Hangzhou 310023, China
 全文: PDF(790 KB)   HTML
摘要:

为了更加科学有效地评价砂型铸造生产过程碳排放量与生产效率的问题,在分析砂型铸造过程碳排放的基础上,提出砂型铸造生产过程的碳效率模型和评价方法,使企业有针对性地开展节能减排活动.根据砂型铸造生产过程碳排放特性,建立工序碳源碳排放计算模型;分析铸造过程生产能力、设备利用率、生产周期以及能源消耗碳排放特征,建立4个维度的砂型铸造过程碳效率计算模型;采用灰色关联分析法,在砂型铸造碳效率模型的基础上,实现了对砂型铸造生产过程的碳效率评价.以某砂型铸造企业造型生产线为实例,验证了该模型的可行性和有效性.

Abstract:

Carbon efficiency model and evaluation method were established based on analyzing the feature of sand casting in order to scientifically and effectively evaluate the carbon efficiency of sand casting process. The model and evaluation method of carbon efficiency were used for energy-conservation and emission-reduction effectively. The calculation model of process carbon sources was proposed based on the characteristics of sand casting production processes. The four-dimensional model of carbon efficiency was constructed with analyzing the production capacity, utilization of equipment, production cycle and energy consumption. The grey incidence analysis method based on carbon efficiency model was used to evaluate carbon efficiency of sand casting process. The examples of sand casting production process were performed to illustrate the application of the model and evaluation method.

出版日期: 2018-06-06
:  TH 16  
基金资助:

国家自然科学基金资助项目(51175464);浙江省自然基金项目(LQ13G010009);浙江省教育厅科研项目(Y201223365),桐乡科技计划项目(201302036);浙江科技学院交叉预研项目(2014JC02Y)

通讯作者: 唐任仲,男,教授,博导     E-mail: tangrz@zju.edu.cn
作者简介: 郑军(1981-),男,讲师,博士生,从事低碳制造、制造服务、铸造工艺等的研究. E-mail: junzheng@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

郑军,唐任仲. 面向砂型铸造的碳排放效率建模及评价方法[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.01.015.

ZHENG Jun,TANG Ren-zhong. Carbon efficiency model and evaluation method for sand casting. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.01.015.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.01.015        http://www.zjujournals.com/eng/CN/Y2015/V49/I1/102

[1] 范德成,王韶华,张伟. 基于低碳的能耗结构优化模型构建及实证分析[J]. 哈尔滨工程大学学报, 2013, 34(7): 16.
FAN De-cheng, WANG Shao-hua, ZHANG Wei. Optimization model construction of energy consumption structure to low-carbon and empirical analysis [J]. Journal of Harbin Engineering University, 2013, 34(7): 16.
[2] TAYLOR P. Worldwide trends in energy use and efficiency, key insights from IEA indicator analysis [R]. Paris:International Energy Agency (IEA),2008.
[3] 柳建国,黄天佑,卢定全,等. “十二五”中国铸造行业发展浅析[J]. 铸造技术,2012(9): 1090-1093.
LIU Jian-guo, HUANG Tian-you, LU Ding-quan, et al. Analysis on development of Chinese foundry industry in 12th five-year plan period [J]. Foundry Technology, 2012(9): 1090-1093.
[4] WORRELL E. The next frontier to realize industrial energy efficiency [C] ∥World Renewable Energy Congress. Sweden: [s.n.], 2011: 8-13.
[5] ZUGHBI H, ZULLI P. Energy consumption and CO2 emissions benchmarking and modelling in port Kembla steelworks [C]∥ Chemeca 2011: Engineering a Better World. Sydney: A.C.T, 2011: 1053-1064.
[6] HESSEBLACH J, HERRMANN C. Glocalized solutions for sustainability in manufacturing [C]∥Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universitt Braunschweig. Berlin: [s.n.], 2011.
[7] ABDELAZIZ E, SAIDUR R, MEKHILEF S. A review on energy saving strategies in industrial sector [J]. Renewable and Sustainable Energy Reviews, 2011, 15(1): 150-168.
[8] 何建坤,刘滨. 作为温室气体排放衡量指标的碳排放强度分析[J]. 清华大学学报:自然科学版,2004, 44(06):740-743.
HE Jian-kun, LIU Bin. Analysis of carbon emission intensity as the main index for greenhouse gas emission mitigation commitments [J]. Journal of Tsinghua University: Science and Technology, 2004, 44(06): 740-743.
[9] IPCC. 2006 IPCC guidelines for national greenhouses gas inventories [R/OL]. [2010-03-15]. http:∥www.ipcc-nggip.iges.or.jp/public/2006gl/index.html.
[10] LAURENT A, OLSEN S I, HAUSCHILD M Z. Carbon footprint as environmental performance indicator for the manufacturing industry [J]. CIRP Annals-Manufacturing Technology, 2010, 59(1): 37-40.
[11] KAYA Y, YOKOBORI K. Environment, energy and economy: strategies for sustainability [M]. Washington, DC: Aspen Inst, 1998.
[12] MIELNIK O, GOLDEMBERG J. The evolution of the carbonization index in developing countries [J]. Energy Policy, 1999, 27(25): 307-308.
[13] ZhOU P, ANG B W, HAN J Y. Total factor carbon emission performance: a Malmquist index analysis [J]. Energy Economics, 32(1): 1942011.
[14] BERGLUND J, MICHALOSKI J, SWEE L, et al. Energy efficiency analysis for a casting production system [C]∥Simulation Conference (WSC), Proceedings of the 2011 Winter. Phoenix: IEEE, 2011.
[15] 何建坤,苏明山. 应对全球气候变化下的碳生产率分析[J]. 中国软科学,2009(10): 42-47.
HE Jian-kun, SU Ming-shan. Carbon productivity analysis to address global climate change [J]. China Soft Science, 2009(10): 42-47.
[16] 谌伟,诸大建,白竹岚. 上海市工业碳排放总量和碳生产率关系[J]. 中国人口资源与环境,2010, 20(9): 24-29.
CHEN Wei, ZHU Da-jian, BAI Zhu-lan. Research on relationship between industrial carbon emissions and carbon productivity in Shanghai [J]. China Population, Resources and Environment, 2010, 20(9): 24-29.
[17] 刘国平,曹莉萍. 基于福利绩效的碳生产率研究[J]. 软科学,2011, 25(1): 71-74.
LIU Guo-ping, CAO Li-ping. Research on carbon productivity based on welfare performance [J]. Soft Science, 2011, 25(1): 71-74.
[18] 史磊刚, 范志超, 孔凡磊, 等 .华北平原主要作物生产的碳效率研究初报 [J].作物学报, 2011, 37(8): 1485-1490.
SHI Lei-gang, FAN Zhi-chao, KONG Fan-lei, et al. Preliminary study on the carbon efficiency of main crops production in North China plain [J]. Acta Agronomica Sinica, 2011, 37(8): 1485-1490.
[19] 曹华军,李洪丞,宋胜利,等. 基于生命周期评价的机床生命周期碳排放评估方法及应用[J]. 计算机集成制造系统, 2011,17(11): 2432-2437.
CAO Hua-jun, LI Hong-cheng, SONG Sheng-li, et al. Evaluation method and application for carbon emissions of machine tool based on life cycle assessment [J]. Computer Integrated Manufacturing Systems, 2011,17(11): 2432-2437.
[20] 陶雪飞,曹华军,李洪丞,等. 基于碳排放强度系数的产品物料消耗评价方法及应用[J]. 系统工程, 2011, 29(2): 123126.
TAO Xue-fei, CAO Hua-jun, LI Hong-cheng, et al. Assessment model of product material consumption based on carbon intesnity coefficient and its application [J]. Systems Engineering, 2011, 29(2): 123126.
[21] 郑军, 唐任仲, 胡罗克. 基于工序碳源的砂型铸造过程碳排放建模方法[J]. 计算机集成制造系统, 2014, 20(04): 898-908.
ZHENG Jun, TANG Ren-zhong, HU Luo-ke. Carbon emission modeling of sand casting based on process carbon sources [J]. Computer Integrated Manufacturing Systems, 2014, 20(04): 898-908.
[22] 孙德厂,史海波,尚文利,等. 基于ISA-95的离散制造生产能力建模[J]. 计算机集成制造系统, 2013, 19(05): 954-963.
SUN De-chang, SHI Hai-bo, SHANG Wen-li, et al. Discrete manufacturing production capacity modeling based on ISA-95 [J]. Computer Integrated Manufacturing Systems, 2013, 19(05): 954-963.
[23] 文志平,刘婷,张丰,等. 基于GIS与灰色关联分析的水位方案综合评价模型[J]. 浙江大学学报:理学版, 2012, 39(01): 101-106.
WEN Zhi-ping, LIU Ting, ZHANG Feng, et al. Comprehensive evaluation model for normal water level scheme based on GIS and grey correlation analysis [J]. Journal of Zhejiang University: Science Edition, 2012, 39(01): 101-106.
[24] 鲍新中, 张建斌, 刘澄. 基于粗糙集条件信息熵的权重确定方法[J]. 中国管理科学,2009,17(03): 131-135.
BAO Xin-zhong, ZHANG Jian-bin, LIU Cheng. A new method of ascertaining attribute weight based on rough sets conditional information entropy [J]. Chinese Journal of Management Science, 2009,17(03): 131-135.

[1] 何雪军, 王进, 陆国栋, 刘振宇, 陈立, 金晶. 基于三角网切片及碰撞检测的工业机器人三维头像雕刻[J]. 浙江大学学报(工学版), 2017, 51(6): 1104-1110.
[2] 曲巍崴, 卢贤刚, 杨迪. 预连接工艺对壁板动态特性的影响分析[J]. 浙江大学学报(工学版), 2017, 51(2): 336-343.
[3] 王自立, 张树有, 裘乐淼. 基于可信度区间的注塑装备设计塑化能耗分析[J]. 浙江大学学报(工学版), 2017, 51(2): 328-335.
[4] 王越, 苏宏业, 邵寒山, 卢山,谢磊. 需求与公用工程不确定的生产计划与调度集成[J]. 浙江大学学报(工学版), 2017, 51(1): 57-67.
[5] 罗仕鉴, 董烨楠. 面向创意设计的器物知识分类研究[J]. 浙江大学学报(工学版), 2017, 51(1): 113-123.
[6] 文贤鹤, 周晓军, 杨辰龙. 云制造模式车辆试验服务平台构建方法[J]. 浙江大学学报(工学版), 2016, 50(12): 2254-2261.
[7] 何雪军,王进,陆国栋,陈立. 岛中含湖型截面的环切刀轨连接方法[J]. 浙江大学学报(工学版), 2016, 50(9): 1654-1661.
[8] 过海,王进,陆国栋. 金属板坯道次间变进给率普通旋压方法[J]. 浙江大学学报(工学版), 2016, 50(9): 1646-1653.
[9] 曲巍崴, 唐伟, 毕运波, 李少波, 罗水均. 避免强迫装配和提升效率的预连接工艺规划[J]. 浙江大学学报(工学版), 2016, 50(8): 1561-1569.
[10] 刘征宏, 谢庆生, 李少波, 林丽. 基于潜在语义分析和感性工学的用户需求匹配[J]. 浙江大学学报(工学版), 2016, 50(2): 224-233.
[11] 毕运波,李夏,严伟苗,沈立恒, 朱宇,方伟. 面向螺旋铣制孔过程的压脚压紧力优化[J]. 浙江大学学报(工学版), 2016, 50(1): 102-110.
[12] 吴海曦,余忠华,张浩,杨振生,WANG Yan. 面向熔融沉积成型的3D打印机故障声发射监控方法[J]. 浙江大学学报(工学版), 2016, 50(1): 78-84.
[13] 毕运波,吴原骅,朱伟东,沈立恒,黄稳,朱宇. 飞机叠层结构预联接工艺优化[J]. 浙江大学学报(工学版), 2015, 49(11): 2040-2046.
[14] 董辉跃,朱灵盛, 章明, 李少波,罗水均. 飞机蒙皮切边的螺旋铣削方法[J]. 浙江大学学报(工学版), 2015, 49(11): 2033-2039.
[15] 冯刚,付国强,孙磊,傅建中. 多轴数控机床转台几何误差辨识新方法[J]. 浙江大学学报(工学版), 2015, 49(11): 2083-2091.